MATERIALS, ADHESIVES AND COATINGS
Supreme 10HT, 10HTCL, 10HTF-1, 10HTND-3 one-component toughened hot-cure epoxies (from 4 K to +204 °C)
Country: · Model: Supreme 10HT, Supreme 10HTCL, Supreme 10HTF-1, Supreme 10HTND-3
The flagship one-component toughened hot-cure epoxy system, with a shear strength of 24.8–26.2 MPa, working from 4 K to +204 °C. It needs no mixing and no freezing. It is used for structural bonding in aerospace, electronics, optics and specialty machine building.
- Type
- one-component toughened epoxy (not a frozen premix), unlimited pot life at room temperature
- Cure
- Supreme 10HT 60–75 min at 121 °C or 35–40 min at 149 °C; 10HTF-1 5–10 min at 149 °C or 15–20 min at 121 °C
- Shear strength
- Supreme 10HT 24.8–26.2 MPa (3600–3800 psi); 10HTF-1 > 22 MPa; 10HTCL 19.3–20.7 MPa
- Tensile strength of 10HTND-3
- 55–62 MPa
Technical specifications
| Type | one-component toughened epoxy (not a frozen premix), unlimited pot life at room temperature |
|---|---|
| Cure | Supreme 10HT 60–75 min at 121 °C or 35–40 min at 149 °C; 10HTF-1 5–10 min at 149 °C or 15–20 min at 121 °C |
| Shear strength | Supreme 10HT 24.8–26.2 MPa (3600–3800 psi); 10HTF-1 > 22 MPa; 10HTCL 19.3–20.7 MPa |
| Tensile strength of 10HTND-3 | 55–62 MPa |
| Tg of Supreme 10HT | 130–135 °C |
| Operating temperature | from 4 K to +204 °C |
| Viscosity | 10HTCL 140 000–200 000 mPa·s; 10HT > 500 000 mPa·s; 10HTND-3 non-sag paste |
| Certifications | ASTM E595 for Supreme 10HT, 10HTCL |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
Supreme 10HT is a true one-component system with no freezing and unlimited pot life at room temperature. Curing starts only on heating, 60–75 minutes at 121 °C or 35–40 minutes at 149 °C. Shear strength is 24.8–26.2 MPa, the range is from 4 K to +204 °C, Tg 130–135 °C, and ASTM E595 compliance is confirmed. Supreme 10HTCL with a viscosity of 140 000–200 000 mPa·s has the same range and a volume resistivity above 10¹⁴ Ω·cm. Supreme 10HTF-1 is a fast paste that cures in 5–10 minutes at 149 °C or 15–20 minutes at 121 °C with a post-cure of 1–2 hours at 121–149 °C, shear above 22 MPa and modulus of 2.4–2.8 GPa. Supreme 10HTND-3 does not sag during heating and has a tensile strength of 55–62 MPa.
How to choose
Base Supreme 10HT suits cases that need the highest shear strength. For a fast cycle, 5–10 minutes at 149 °C, take 10HTF-1, and where the adhesive must stay on a vertical surface during heating, 10HTND-3. The less viscous 10HTCL, 140 000–200 000 mPa·s, spreads better. The series also includes thermally conductive 10AOHT and 10ANHT, nickel-filled and elasticized versions.
Request a price and lead time
Supreme 10HT, 10HTCL, 10HTF-1, 10HTND-3 one-component toughened hot-cure epoxies (from 4 K to +204 °C). We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
How does one-component Supreme 10HT differ from a frozen premix?
It is not a pre-mixed frozen composition, so its pot life at room temperature is unlimited. Curing starts only on heating.
How does Supreme 10HT cure?
60–75 minutes at 121 °C or 35–40 minutes at 149 °C. The glass transition temperature is 130–135 °C.
What is the shear strength of Supreme 10HT?
24.8–26.2 MPa (3600–3800 psi). For 10HTF-1 above 22 MPa, for 10HTCL 19.3–20.7 MPa.
What is the temperature range of Supreme 10HT?
From 4 K to +204 °C. The system meets ASTM E595 and withstands severe thermal cycling, impact and vibration.
What is the viscosity of Supreme 10HTCL?
140 000–200 000 mPa·s, which is much lower than Supreme 10HT with a viscosity above 500 000 mPa·s.
Similar products
C-RAM RGD / KR / KRS / KFS / VHPC-RAM RGD / KR / KRS / KFS / VHP rigid and cast iron-epoxy and iron-silicone absorbers, radar-absorbing paints
C-RAM EVA / SFC-MP / ODP / CFCC-RAM EVA / SFC-MP / ODP / CFC higher-power, ventilated, all-weather and cleanroom pyramidal absorbers
TUK / MiniTUKTouch-Up Kits for Two-Component Aviation Primers and Enamels
Aerowave 2001 / 2002 / 2003 / 3003 / 5001 / Filler 2501Waterborne System of Primers, Epoxy and Polyurethane Enamels (Airbus, Eurofighter, Leonardo)REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.