CSF — cyclone classifier for dedusting and fine fraction separation, 5–250 µm, 10–35 000 kg/h
Country: · Model: CSF
CSF is a cyclone classifier for dry powders that separates material with a fine fraction top size of 5–250 µm at a capacity of 10–35 000 kg/h. It works inline with a mill or as a separate classification system and is suitable for retrofitting existing plants. Typical tasks are dedusting, removal of impurities and production of narrow fractions.
- Principle
- the product stream enters the cyclone body in a spiral; the fine fraction passes through the rotating classifier wheel, the coarse fraction descends along the wall
- Fine fraction top size limit
- 5–250 µm
- Capacity
- 10–35 000 kg/h
- Power
- 1–160 kW
Technical specifications
| Principle | the product stream enters the cyclone body in a spiral; the fine fraction passes through the rotating classifier wheel, the coarse fraction descends along the wall |
|---|---|
| Fine fraction top size limit | 5–250 µm |
| Capacity | 10–35 000 kg/h |
| Power | 1–160 kW |
| Air flow | 100–60 000 m³/h |
| Diameter | up to 1500 mm |
| Modes | inline with mills of various types or a separate system; retrofitting of existing plants |
| Options | impact-resistant PSR 11 or ATEX; conversion to a cyclone separator; lifting and swiveling device for quick cleaning |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The air stream with ground material enters the cyclone body through the inlet spiral. The fine fraction follows the flow through the rotating classifier wheel, while the coarse fraction is thrown to the wall by centrifugal forces and descends. The separation limit is set by the wheel speed, so the mode can be changed quickly. Power is 1–160 kW, air flow 100–60 000 m³/h, and body diameter up to 1500 mm. An impact-resistant PSR 11 version and an ATEX version for explosive dust are available, and the unit can be converted into a cyclone separator. The lifting and swiveling device simplifies cleaning and speeds up changeover from product to product, which matters when recipes change often.
How to choose
The choice starts with the required top size limit and capacity. CSF is installed inline with mills of various types or used as a separate system. It is applied for dedusting powder coatings, bleaching earth and gypsum, and for processing limestone and calcium hydroxide. If classification is needed on the full process air stream without preliminary separation, see DC and DCX, and for a top size of 2–200 µm without a cyclone, GRC is suitable.
Request a price and lead time
CSF — cyclone classifier for dedusting and fine fraction separation, 5–250 µm, 10–35 000 kg/h. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What separation fineness range does CSF have?
The fine fraction top size limit is 5–250 µm. It is set by the speed of the classifier wheel.
What are the capacity and air flow of CSF?
Capacity is from 10 to 35 000 kg/h and air flow 100–60 000 m³/h at a power of 1–160 kW.
Can CSF be fitted to an existing grinding line?
Yes, the design is well suited for retrofitting existing plants. CSF works inline with mills of various types or as a separate system.
Is there a version for explosive dust?
Yes, an impact-resistant PSR 11 version and an ATEX version are offered.
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.