SF / EBT-54 manual and ratchet cable cutters for Cu/Al cables up to 500 mm²
Country: Spain · Model: SF / EBT-54
SF series mechanical cable cutters cut copper and aluminium low-voltage cables of 16 to 500 mm² without crushing the cores, and the ratchet EBT-54 completes the range for fast cutting with little effort. A flat cut face of the core makes later crimping of the lug easier. The tools are needed for installing cable lines, assembling panels and repairing 0.4 kV distribution networks.
- SF-21 / SF-30 / SF-31
- Cu and Al cables up to 16 / 35 / 50 mm²; length 160 / 210 / 235 mm; weight 0.19 / 0.36 / 0.50 kg
- SF-36A / SF-60A
- two-stage ratchet drive, one-hand or two-hand operation, SF-36A length 250 mm
- SF-240
- up to 240 mm², length 565 mm, 2.15 kg
- SF-500
- up to 500 mm², length 745 mm, 4.48 kg; also communication cables
Technical specifications
| SF-21 / SF-30 / SF-31 | Cu and Al cables up to 16 / 35 / 50 mm²; length 160 / 210 / 235 mm; weight 0.19 / 0.36 / 0.50 kg |
|---|---|
| SF-36A / SF-60A | two-stage ratchet drive, one-hand or two-hand operation, SF-36A length 250 mm |
| SF-240 | up to 240 mm², length 565 mm, 2.15 kg |
| SF-500 | up to 500 mm², length 745 mm, 4.48 kg; also communication cables |
| SF-240/500 blades | forged hardened chrome-vanadium steel, replaceable |
| SF-240/500 handles | steel, double lever |
| Limitation | not for steel and steel rope (SF-21/30/31) |
| Ratchet cable cutter | EBT-54 with battery power |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The range is divided into three groups by size and drive. The compact SF-21, SF-30 and SF-31 are designed for copper and aluminium up to 16, 35 and 50 mm² respectively, are 160, 210 and 235 mm long and weigh 0.19, 0.36 and 0.50 kg. Steel and steel rope must not be cut with these models. The ratchet SF-36A and SF-60A have a two-stage drive with a high gear ratio, work with one or two hands and leave a clean flat cut even in a tight cabinet. The lever-type SF-240 and SF-500 have a double lever, steel handles and replaceable blades forged from hardened chrome-vanadium electrical steel. Both lever models take single-core cables with solid and stranded conductors, multicore cables and communication cables.
How to choose
The largest section found on site decides everything. Up to 50 mm² the compact SF-21, SF-30 or SF-31 are enough, cables up to 240 mm² are cut by the SF-240, 565 mm long and weighing 2.15 kg, and up to 500 mm² the SF-500 is used. Armoured cables, AS conductors and large diameters are beyond this group — for them there are the hydraulic ET-45, the battery EBT-45 and EBT-106-VOLTCUT, or the CT-45 and CT-85 cutting heads for a pump.
Request a price and lead time
SF / EBT-54 manual and ratchet cable cutters for Cu/Al cables up to 500 mm². We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
Can the SF-21 cable cutter cut steel rope?
No, the compact SF-21, SF-30 and SF-31 are not intended for steel and steel wire. Rope and AS conductors are cut by the hydraulic ET-45.
What is the weight and length of the SF-500 cable cutter?
The SF-500 is 745 mm long and weighs 4.48 kg. The long steel handles with a double lever reduce the effort when cutting cable up to 500 mm².
What makes the SF-36A ratchet cable cutter more convenient than ordinary cutters?
The two-stage ratchet drive splits the cut into several handle strokes, so the cable is cut with one hand or two. The SF-36A is only 250 mm long and fits into tight panels.
Are the blades on the SF-240 and SF-500 cable cutters replaceable?
Yes, the blades are replaceable, forged from chrome-vanadium steel and hardened. After wear only the blades are replaced, and the lever mechanism stays.
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.