ALZIR / LEDA / CLAVO - marker (guide) luminaire for walls, steps and floors
Country: · Model: ALZIR / LEDA / CLAVO
ALZIR, LEDA, CLAVO and five other series of marker luminaires mark the contours of escape routes, steps, aisles, ramps and obstacles with points of light. The protection degree of the enclosures is within IP42-IP66 and impact resistance IK06-IK07, depending on the series.
- Series
- ALZIR, LECU, LEDA, CLAVO, AQUA, LYRA, SHERPA, ARAS
- IP
- IP42-IP66 (by series)
- IK
- IK06-IK07
- Mounting
- flush in a wall, under a step, in a floor
Technical specifications
| Series | ALZIR, LECU, LEDA, CLAVO, AQUA, LYRA, SHERPA, ARAS |
|---|---|
| IP | IP42-IP66 (by series) |
| IK | IK06-IK07 |
| Mounting | flush in a wall, under a step, in a floor |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
Markers are installed at the level of the floor, steps and the lower part of walls. They help with orientation in smoke-filled and darkened rooms, and in normal mode serve as decorative lighting in cinemas, theatres, hotels and on stairs. The section has eight series, ALZIR, LECU, LEDA, CLAVO, AQUA, LYRA, SHERPA and ARAS, with square and round enclosures. Protection degrees IP42, IP62, IP64, IP65 and IP66 and impact resistance IK06 and IK07 are available for the range, and the exact values depend on the series and version. LEDA is made of aluminium and polished stainless steel with glass, and its small size makes it possible to build the marker flush into a wall, under a step or into a floor. Markers usually work in systems with central power supply, and LPS units have an analogue input for adjusting their brightness. For such sites LPS units give 24 V DC and make it possible to program the operating time from 0.5 to 8 h. The manufacturer has been designing emergency lighting since 1980.
How to choose
The series is chosen by place and humidity. For outdoor paths and facades a higher protection degree is needed, up to IP66, and for an interior IP42 is enough. A square or round enclosure is chosen to suit the architecture, and LEDA is taken when the marker must be almost unnoticeable in a wall, step or floor. For sites with central power supply 24 V LPS units are needed. As a stand-alone emergency luminaire for a room, look at IZAR for 250-400 lm.
Request a price and lead time
ALZIR / LEDA / CLAVO - marker (guide) luminaire for walls, steps and floors. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What are marker luminaires used for?
They mark the contours of escape routes, steps, aisles, ramps and obstacles with points of light at the level of the floor, steps and the lower part of walls.
What protection degrees do the ALZIR, LEDA and CLAVO markers have?
IP42, IP62, IP64, IP65 and IP66 are available for the whole range, and the specific value depends on the series and version.
What is the impact resistance of the markers?
IK06 or IK07 depending on the series and version.
How are marker luminaires powered?
Usually from central LPS units at 24 V DC, where the operating time is programmed from 0.5 to 8 h.
Can a marker be built into a wall or floor?
Yes, the small LEDA made of aluminium and polished stainless steel is built in flush into walls, under steps and into floors.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.