HCT, HCH industrial axial fans (duct and wall-mounted), Ø 250…1000 mm, up to ~72 000 m³/h
Country: · Model: HCT, HCH
The axial fans HCT (duct) and HCH (wall-mounted) have an impeller diameter of up to 1000 mm and an airflow in the tables of about 71 850 m³/h. Motor power by model code ranges from 0.25 to 15 kW. They are installed in workshops, warehouses, garages, agricultural and livestock buildings and at metro stations.
- Type
- HCT — duct (tubular) axial fan; HCH — wall-mounted axial fan on a support ring
- Sizes
- HCT 25…100, HCH 35…100 (impeller diameter up to 1000 mm)
- Motor power
- 0.25…15 kW (by model code)
- Maximum airflow
- up to ~71 850 m³/h (per datasheets)
Technical specifications
| Type | HCT — duct (tubular) axial fan; HCH — wall-mounted axial fan on a support ring |
|---|---|
| Sizes | HCT 25…100, HCH 35…100 (impeller diameter up to 1000 mm) |
| Motor power | 0.25…15 kW (by model code) |
| Maximum airflow | up to ~71 850 m³/h (per datasheets) |
| Impeller | PL — glass-fiber-reinforced polyamide-6; AL — cast aluminum |
| Motor | class F, IP55 (single-phase 45…56 — IP54), 1 or 2 speeds |
| Power supply | 1~ 230 V; 3~ 230/400 V (up to 4 kW), 400/690 V (above 4 kW), 50 Hz |
| Ambient temperature | −25…+50 °C |
| Casing | HCT — tubular sheet steel with an external terminal box; HCH — steel ring |
| Options | reverse airflow direction, 100 % reversible impellers, ATEX cat. 2, vertical axis |
| Versions | HCT/EC — EC IE5 motor; HFT; HCT/IMP — jet; HCT/MAR — marine |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
HCT has a tubular sheet steel casing with an external terminal box, while in HCH the impeller and motor are mounted on a steel ring for installation in a wall opening or on a partition. The impeller is made in two variants, PL of glass-fiber-reinforced polyamide-6 and AL of cast aluminum, and 2-pole models of small sizes come only with AL. The standard airflow goes from the motor to the impeller, and on request a reverse direction, fully reversible impellers, a vertical axis and ATEX category 2 are possible. The class F motors run on ball bearings, IP55 (single-phase of sizes 45–56 IP54), with one or two speeds, and a single-phase 230 V 50 Hz or three-phase 230/400 V 50 Hz supply up to 4 kW and 400/690 V 50 Hz above 4 kW. The ambient temperature is from −25 to +50 °C. The coating is anti-corrosion, of polyester resin polymerized at 190 °C.
How to choose
HCT sizes range from 25 to 100 and HCH from 35 to 100, with 2-pole, 4-pole and 6-pole versions. To save energy there is HCT/EC with an EC Technology motor of class IE5, for heavy conditions HFT, for long-throw jets HCT/IMP and HCT/IMP-C, and for marine and ship equipment HCT/MAR. If lower noise is needed, look at CJHCH, the same fan in a sound-insulated box. Equipment cooling and extraction from production rooms with moderate temperatures also belong to the field of application of this series.
Request a price and lead time
HCT, HCH industrial axial fans (duct and wall-mounted), Ø 250…1000 mm, up to ~72 000 m³/h. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
How does HCT differ from HCH?
HCT is a duct, tubular fan that is built into ducts and walls. HCH is wall-mounted, with the impeller and motor mounted on a steel ring.
Which impeller should be chosen, PL or AL?
PL is made of glass-fiber-reinforced polyamide-6, and AL of cast aluminum. 2-pole models of small sizes are made only with AL.
What is the power supply of these fans?
Single-phase 230 V 50 Hz or three-phase 230/400 V up to 4 kW and 400/690 V above 4 kW. The motors are IP55, and single-phase ones of sizes 45–56 are IP54.
What ambient temperature is permitted?
From −25 to +50 °C.
Can a version for explosive atmospheres be ordered?
Yes, ATEX category 2 certification is possible on request, and there are also the HCT/ATEX and HCH/ATEX series.
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.