grid | power V H bloc (OGi bloc) low-maintenance 4, 6 and 12 V blocks
Country: Germany · Model: grid | power V H bloc (OGi bloc)
Low-maintenance 4, 6 and 12 V blocks of approx. 60–260 Ah on OGi grid plates. They are used in UPS, switchgear, emergency lighting, for starting diesel generators and in railway infrastructure.
- Technology
- lead-acid, OGi grid plates, pocket separators
- Design
- 4 V, 6 V and 12 V blocks, approx. 60–260 Ah
- Application
- UPS, diesel generator starting, railway infrastructure
- Standards
- DIN EN 60896, DIN 40738
Technical specifications
| Technology | lead-acid, OGi grid plates, pocket separators |
|---|---|
| Design | 4 V, 6 V and 12 V blocks, approx. 60–260 Ah |
| Application | UPS, diesel generator starting, railway infrastructure |
| Standards | DIN EN 60896, DIN 40738 |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The block format reduces the number of inter-cell connections compared with a battery of individual 2 V cells, installation is faster and there are fewer control points. OGi grid plates deliver high current, so the blocks confidently crank the diesel generator starter and hold the UPS load in the first minutes. Pocket separators keep the active mass near the plate and protect against short circuits caused by its shedding, which extends the service life under frequent starts. The transparent case shows the electrolyte level without opening the block. The battery is flooded, water needs to be added rarely, but room ventilation is mandatory. The design meets DIN EN 60896 and DIN 40738.
How to choose
The block voltage of 4, 6 or 12 V is chosen so that the string gives the required voltage with a minimum of connections, and the capacity within 60–260 Ah is determined by the starting current or autonomy time. If maintenance is not possible at all, take sealed AGM blocks grid | power VR X at 57–166 Ah. For warm rooms up to +55 °C, AGM grid | Xtreme VR is suitable.
Request a price and lead time
grid | power V H bloc (OGi bloc) low-maintenance 4, 6 and 12 V blocks. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What voltages do grid | power V H bloc blocks have?
The blocks are made for 4, 6 and 12 V with a capacity of approx. 60–260 Ah.
Are OGi bloc blocks suitable for starting a diesel generator?
Yes, starting diesel generators is directly part of the intended use of the series. OGi plates are designed for high starting currents, and the block capacity is up to 260 Ah.
Does OGi bloc require maintenance?
The blocks are low-maintenance but flooded, so the electrolyte level is checked periodically and water is added. The design meets DIN EN 60896 and DIN 40738.
Where else are grid | power V H bloc blocks used?
In UPS, switchgear, emergency lighting and railway infrastructure. The 12 V blocks are convenient where a minimum of connections is needed.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.