PowerBrick Pro 12V 7.5Ah LiFePO4 battery

Country: France · Model: PowerBrick Pro 12V-7.5Ah

A lithium iron phosphate drop-in for the lead-acid YUASA NP7-12, same 151 × 65 × 92 mm size, 12.8 V / 7.5 Ah, 96 Wh and 0.92 kg. The PowerBrick Pro 12V-7.5Ah delivers 15 A continuously and 20 A for up to 30 s in UPS units, security systems and telecom.

Voltage: 12.8 V
Capacity: 7.5 Ah
Energy: 96 Wh
Cycle life: >3000
Protection: IP65
Weight: 0.92 kg
Dimensions: 151 × 65 × 92

Technical specifications

Electrical
Nominal voltage / nominal capacity	12.8 V / 7.5 Ah
Stored energy	96 Wh
Volumetric energy density / specific energy	106.3 Wh/L / 104.3 Wh/kg
Internal resistance	≤ 40 mΩ
Cycle life	>3,000 cycles
Self-discharge	< 3% per month
Energy efficiency	> 96%
Standard charge
Charge voltage	14.4 V ± 0.2 V (optional float voltage: max 13.36 V)
Charge mode	CC/CV (constant current / constant voltage)
Continuous charge current / maximum charge current	7.5 A / 10 A
BMS charge cut-off voltage	14.8 V ± 0.1 V
Standard discharge
Instant peak discharge current	105 A ± 10 A (max 100 ms)
Continuous discharge current	15 A (192 W)
Maximum discharge current (< 30 s)	20 A (256 W)
BMS discharge cut-off voltage	10 V
Environment
Charge temperature range	0 °C to +60 °C
Discharge temperature range	-20 °C to +60 °C
Storage temperature	0 °C to +60 °C at 60 ± 25% RH
IP protection rating	IP65
Mechanical
Cell type	Cylindrical
Casing material	ABS
Dimensions	151 × 65 × 92 mm (L × W × H) (same size as NP7-12)
Weight	0.92 kg
Terminals	Faston 6.35 mm clip
Customs codes (for reference)
HS code	8507.60
UKTZED code (Ukraine)	8507600000
CN code (EU)	85076000

Specifications, charts and drawings are taken from the manufacturer’s technical documentation. Updated 10/31/2026. Customs codes are for reference only; the final code is determined at customs declaration for the specific model.

Description

The 6.35 mm Faston terminals take the existing wire connectors, so no rewiring is needed. Inside are cylindrical cells and the BMS, and the ABS case is sealed to IP65. At 15 A the load gets 192 W, at 20 A it gets 256 W, and a peak pulse of 105 A ± 10 A is permitted for up to 100 ms. The BMS ends charging at 14.8 V ± 0.1 V and discharge at 10 V, internal resistance is no more than 40 mΩ and energy efficiency above 96%. The datasheet gives storage at 0 °C to +60 °C.

How to choose

If the bay fits an NP7-12, this model drops straight in. With more room, the PowerBrick Pro 12V-12Ah gives 153.6 Wh in 151 × 98 × 95 mm, and loads of a hundred watts and more call for the PowerBrick+ 12V-20Ah with 256 Wh.