LiONFORCE TP120 lithium-ion monobloc 24 V 105 Ah
Country: Greece · Model: LiONFORCE TP120
The LiONFORCE TP120 lithium-ion monobloc of 24 V and 105 Ah is installed in place of gel batteries in light warehouse equipment. It also works in lifting platforms and cleaning machines with a 24 V on-board network.
- Voltage
- 24 V
- Capacity
- 105 Ah
- Charging
- opportunity and fast
- Indication
- SoC indicator
Technical specifications
| Voltage | 24 V |
|---|---|
| Capacity | 105 Ah |
| Charging | opportunity and fast |
| Indication | SoC indicator |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The main difference from a lead battery is the charging mode. The TP120 accepts opportunity charging, so the machine can be put on the charger during breaks between shifts, and fast charging can be used when needed. For a gel battery such a schedule would mean permanent undercharging and sulfation of the plates, so the replacement removes the restriction on the operating mode of the equipment. The charge level is shown by a built-in SoC indicator, and the operator sees the remaining energy without separate instruments. The monobloc needs no water topping up and no equalising charge, so maintenance comes down to checking the charger.
How to choose
The first thing to check is the voltage of the machine, since the TP120 is designed only for a 24 V network. Then 105 Ah is compared with the capacity of the gel battery being replaced and with the shift length. For forklifts with a voltage of up to 80 V and a charging current of up to 400 A, the modular LiONFORCE TP100 series with BMS and GLocal cloud monitoring is intended. If the equipment needs 12 V, the TRIFORCE Lithium 12V LiFePO4 monoblocs of 50–480 Ah are suitable.
Request a price and lead time
LiONFORCE TP120 lithium-ion monobloc 24 V 105 Ah. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
Can a 24 V gel battery be replaced with the LiONFORCE TP120?
Yes, the monobloc is intended for exactly such a replacement; it works from 24 V and has a capacity of 105 Ah. Before replacing, check the dimensions of the compartment and the compatibility of the charger with a lithium-ion battery.
Does the TP120 support fast charging?
Yes, both opportunity charging during breaks and fast charging are permitted. The machine is topped up during the shift instead of one long cycle at night.
How can the charge level of the TP120 monobloc be found out?
The battery has an SoC state-of-charge indicator. It shows the remaining energy, so the operator puts the equipment on charge in time.
For which equipment is the 24 V 105 Ah lithium-ion battery suitable?
For light warehouse equipment, lifting platforms and cleaning machines that previously ran on 24 V gel batteries.
How does the TP120 differ from the LiONFORCE TP100?
The TP120 is a ready 24 V 105 Ah monobloc for light equipment. The TP100 is built from parallel modules for 24–80 V, has a BMS with active balancing and a charging current of up to 400 A for forklifts.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.