POWERBRICK SOLID-STATE SMART 12/24/48V LIFEPO4 BATTERIES

PowerBrick Smart 24V 120Ah solid-state LiFePO4 battery with Bluetooth

Country: France · Model: PowerBrick Smart 24V-120Ah-SS-AB-BT

With 3,072 Wh at 25.6 V and 120 Ah on solid-state LiFePO4 cells, this battery anchors 24 V traction and storage systems. It runs 150 A continuous and 200 A for 30 s at 24.4 kg.

Voltage: 25.6 V
Capacity: 120 Ah
Energy: 3,072 Wh
Cycle life: >4500
Protection: IP65
Weight: 24.4 kg
Dimensions: 505 × 185 × 242

Technical specifications

Electrical
Nominal voltage / nominal capacity	25.6 V / 120 Ah
Stored energy	3,072 Wh
Volumetric energy density / specific energy	137.0 Wh/L / 125.3 Wh/kg
Internal resistance	≤ 10 mΩ
Cycle life	> 4,500 cycles
Self-discharge	< 3% per month
Energy efficiency	> 98%
Standard charge
Charge voltage	28.8 V ± 0.4 V (optional float voltage: 26.72 V max)
Charge mode	CC/CV (constant current / constant voltage)
Continuous charge current / maximum charge current	130 A / 150 A
BMS charge cut-off voltage	29.6 V ± 0.1 V
Standard discharge
Instant peak discharge current	800 A (300 ms)
Continuous discharge current	150 A
Maximum discharge current (< 30 s)	200 A
BMS discharge cut-off voltage	20 V
Environmental
Charge temperature range	0 °C to +55 °C
Discharge temperature range	−20 °C to +60 °C
Storage conditions	0 °C to +50 °C at 60 ± 25% relative humidity
IP rating	IP65
Mechanical
Cell type	Solid-state LiFePO4 cells
Casing material	ABS plastic
Dimensions	505 × 185 × 242 mm
Weight	24.4 kg
Terminals	M8
Customs codes (for reference)
HS code	8507.60
UKTZED code (Ukraine)	8507600000
CN code (EU)	85076000

Specifications, charts and drawings are taken from the manufacturer’s technical documentation. Updated 10/31/2026. Customs codes are for reference only; the final code is determined at customs declaration for the specific model.

Description

The 505 × 185 × 242 mm IP65 ABS case with M8 terminals houses a BMS with active balancing, Bluetooth monitoring and precharge. An 800 A peak lasts 300 ms, enough to start a pump or a cart motor. Continuous charge current of 130 A is above the 120 Ah capacity, so a strong charger fills it in under an hour. The BMS cuts charging at 29.6 V and discharge at 20 V, and internal resistance is 10 mΩ max. Specific energy is 125.3 Wh/kg, from matched, laser-welded cells.

How to choose

Take this model for 24 V when Bluetooth monitoring is enough. If the pack must report to an inverter over CAN and work in the cold, there is the heated PowerBrick Connect 24V-120Ah-SS-AB-CAN-H. The same case comes as the PowerBrick Smart 12V-212Ah-SS-AB-BT at 2,714 Wh for 12 V and the PowerBrick Smart 48V-53Ah-SS-AB-BT for 48 V.