STACK314 stackable C&I energy storage system, 48.2–241.1 kWh
Country: China · Model: STACK314
STACK314 is built from 16.08 kWh LiFePO4 modules, and one stack delivers 48.228 to 241.14 kWh at 200 A. This high-voltage battery goes into the switch room of a small plant for solar storage, peak shaving and backup supply.
- Chemistry
- LiFePO4
- Module
- 16.08 kWh
- System energy
- 48.228–241.14 kWh (3–15 modules)
- Expansion
- up to 12 clusters (2.89 MWh)
Technical specifications
| Chemistry | LiFePO4 |
|---|---|
| Module | 16.08 kWh |
| System energy | 48.228–241.14 kWh (3–15 modules) |
| Expansion | up to 12 clusters (2.89 MWh) |
| Current | 200 A |
| Cycle life | ≥ 8000 cycles |
| Ingress protection | IP20 |
| Communication | CAN, RS485 |
| Customs codes (for reference) | |
| HS code | 8507.60 |
| UKTZED code (Ukraine) | 8507600000 |
| CN code (EU) | 85076000 |
Specifications are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
The smallest build has 3 modules and the largest 15, so capacity changes one module at a time without swapping the stack controller. When one stack is not enough, clusters are combined, up to 12 of them, for a total of 2.89 MWh. The 200 A current sets charge and discharge power, so the PCS or hybrid inverter is sized to that figure and to the voltage of the assembled stack. Cycle life is rated at 8000 or more, which at one peak-shaving cycle a day means many years before capacity loss becomes noticeable. The IP20 enclosure is meant for a dry indoor room, not for outdoor use or an unheated hangar. The stack talks to the inverter and the energy management system over CAN and RS485.
How to choose
Start from the daily load profile, work out the kilowatt-hours needed and divide by 16.08 to get a module count between 3 and 15. For a reserve below 48 kWh, or a battery for a house or restaurant, STACK100 with its 5.12 kWh module is simpler. Outdoor sites call for STACK100 Pro with IP66 or the BF100-C140 cabinet at 100/140 kWh with IP55.
Request a price and lead time
STACK314 stackable C&I energy storage system, 48.2–241.1 kWh. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
How many modules fit in one STACK314 stack?
From 3 to 15 modules of 16.08 kWh each, giving 48.228–241.14 kWh per stack.
How far can a STACK314 system be expanded?
Up to 12 clusters can run in parallel, for about 2.89 MWh in total.
Can STACK314 be installed outdoors?
No, IP20 is suitable only for a dry indoor room. Outdoor use needs a cabinet or battery rated IP55 or higher.
What current and cycle life does STACK314 have?
Operating current is 200 A and cycle life is 8000 cycles or more. It links to the inverter over CAN or RS485.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.