DataSafe XE — 12 V TPPL batteries for sub-5-minute discharge in data centers
Country: USA · Model: DataSafe XE
DataSafe XE 12 V TPPL batteries are optimized for short high-rate discharges under 5 minutes and deliver 764–1,150 W per cell over 15 minutes. They go into UPS systems of hyperscale and newly built data centers.
- Technology
- TPPL, VRLA
- Voltage
- 12 V
- Capacity
- 205–1,040 Ah (8 h)
- Power
- 764–1,150 W/cell (15 min to 1.67 V/cell)
Technical specifications
| Technology | TPPL, VRLA |
|---|---|
| Voltage | 12 V |
| Capacity | 205–1,040 Ah (8 h) |
| Power | 764–1,150 W/cell (15 min to 1.67 V/cell) |
| Application | UPS for hyperscale data centers |
| Customs codes (for reference) | |
| HS code | 8507.20 |
| UKTZED code (Ukraine) | 8507208090 |
| CN code (EU) | 85072080 |
Specifications are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
New data centers often need the battery only until the diesel generators start, so power matters more than hours of autonomy. Thin pure lead plates give low internal resistance and high current per unit of volume. Capacity at the 8-hour rate is 205–1,040 Ah, and power at a 15-minute discharge to 1.67 V/cell is 764–1,150 W/cell. Below 5 minutes the blocks work inside their design zone, and the battery room comes out smaller than with AGM of the same power. The case is sealed (VRLA), needs no watering and fits cabinets or racks next to the UPS. Pure lead corrodes more slowly on continuous float, which matters for batteries that sit on float for years and discharge only during grid faults.
How to choose
Selection takes UPS power, inverter efficiency and runtime, then finds the block in the W/cell table. If you need longer runtime at a lower load, DataSafe HX at 4.8–123 Ah fits. For halls planned around lithium, look at DataSafe Noir with 500–600 kW cabinets for 5 minutes.
Request a price and lead time
DataSafe XE — 12 V TPPL batteries for sub-5-minute discharge in data centers. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What discharge time is DataSafe XE built for?
The blocks are optimized for discharges under 5 minutes, typical of a UPS that only bridges until the generator starts.
What power rating does DataSafe XE have?
The range gives 764–1,150 W per cell at a 15-minute discharge to 1.67 V/cell.
What capacity do DataSafe XE batteries have?
At the 8-hour rate the range covers 205–1,040 Ah with 12 V blocks.
How does DataSafe XE differ from DataSafe HX?
XE is TPPL-based and aimed at large UPS systems in hyperscale data centers. HX blocks are smaller, 4.8–123 Ah, and fit mid-size UPS units and IT systems.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.