WE 1010 soldering station with WEP 70 iron

SOLDERING: SOLDER, FLUXES, SOLDERING EQUIPMENT

WE 1010 soldering station with WEP 70 iron

Country: Germany · Model: WE 1010

Entry-level professional-grade station for training classrooms, service and small-batch assembly. Power 85 W, temperature range 100–450 °C, stability ±6 °C; from 50 to 350 °C the iron heats up in 28 s. ET-series tips are replaced without tools. Housing 150×120×98 mm. Supplied as a set, as the Education Kit with side cutters and solder, or as the Shield Kit with fume extractor.

Type: soldering station
Power: 85 W
Number of channels: 1
Temperature accuracy: ± 5 °C

Request a quote All specifications

Technical specifications

Type	soldering station
Power	85 W
Number of channels	1
Temperature accuracy	± 5 °C
Temperature stability	± 6 °C
Heat-up time 50–350 °C	28 s
Voltage	230 V
Interfaces	none
Tip series	ET
Dimensions W×D×H	150.0 x 120.0 x 98.0 mm
Weight	1.40 kg; 3.07 kg
Models and article numbers	WE1010 Education Kit 230V (T0053298390), WE1010 Set 230V (T0053298699), WE1010 Shield Kit 230V (T0053298391)

Specifications are taken from the manufacturer’s technical documentation. Updated 11/13/2026.

Description

This single-channel digital power unit with an 85 W rating is supplied with the WEP 70 soldering iron and the PH 70 safety rest. It forms a complete hand-soldering workstation built around the ET tip series. The station, the iron and the heat-resistant silicone cable are ESD safe for safe handling of sensitive assemblies. The station has no data interfaces.

The WEP 70 is a 70 W soldering iron with an ergonomic handle. Tips are changed without tools: even a hot tip can be swapped by hand by twisting the plastic knurled nut on the soldering pencil. The set's scope of delivery comprises the power unit, the WEP 70 iron, the PH 70 safety rest and the TC205 cleaning sponge for the safety rest.

Temperature is adjustable from 100 °C to 450 °C (200–850 °F), depending on the tool used. Temperature accuracy is ±5 °C (±9 °F) and temperature stability is ±6 °C (±10 °F). Heating from 50 °C to 350 °C (120–660 °F) takes approximately 28 s. A standby mode and an auto setback function conserve energy and protect the equipment, and password protection preserves the configured settings. The unit operates at 230 V and measures 150.0 x 120.0 x 98.0 mm (L x W x H). Listed weights are 1.40 kg (catalog) and 3.07 kg. The station belongs to the WE Line soldering station family.

Compatible ET tips cover a broad range of geometries. Chisel tips include ET A (1.6 x 0.7 mm), ET AA (1.6 x 0.8 mm), ET B (2.4 x 0.8 mm), ET C (3.2 x 0.8 mm), ET D (4.6 x 0.8 mm), ET E (width 5.6 mm, length 1.2 mm), the long chisels ET L (2.0 x 1.0 mm) and ET M (3.2 x 1.2 mm), and the slim chisel ET R (1.6 x 0.7 mm). Round sloped 45° tips are available as ET F (Ø 1.2 mm), ET BB (Ø 2.4 mm) and ET CC (Ø 3.2 mm). Round blunt tips include ET CS (Ø 3.2 mm) and ET P (Ø 0.8 mm). Further options are: - ET SMD chip soldering/desoldering tips in 2.5 x 1.5 mm and 3.8 x 1.5 mm - the ET GW gull wing tip (Ø 6.8 mm) - an ET measuring tip - an ET screw-in tip with M5 male thread

Older tips 4ETH, 4ETK, 4ETO and 4ETS must be replaced, because the WEP 70 requires the L versions: 4ETHL-1 (chisel, 0.8 x 0.4 mm), 4ETKL-1 (1.2 mm), 4ETOL-1 (long conical, Ø 0.8 mm) and 4ETSL-1 (long conical, Ø 0.4 mm).

Optional accessories include an ET soldering tip set and antistatic ESD premium workstation soldering mat sets, 900 x 600 mm, in blue or grey. The station is offered in three configurations: WE1010 Set 230V (T0053298699), WE1010 Education Kit 230V (T0053298390) and WE1010 Shield Kit 230V (T0053298391).