A/C-Right L — stabilizer for household appliances 12–15 A
Country: United Kingdom · Model: A/C-Right L
The A/C-Right L microprocessor stabilizer, rated 12 or 15 A, is designed for household air conditioners and refrigerators. It works at an input voltage of 145–270 V and switches the appliance off when the mains goes outside these limits.
- Current
- 12 and 15 A
- Input range
- 145–270 V
- Start delay
- 3 min
- Functions
- AVS, TimeSave, surge suppression
Technical specifications
| Current | 12 and 15 A |
|---|---|
| Input range | 145–270 V |
| Start delay | 3 min |
| Functions | AVS, TimeSave, surge suppression |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The microprocessor monitors the input voltage and controls the regulation, and the AVS function opens the circuit when the voltage goes outside 145–270 V. After the mains is restored, the load is switched on only after 3 min, which is how long the compressor needs for the pressure in the circuit to equalize so that the motor does not start under load. TimeSave removes this pause when the mains was absent longer than the delay time. Built-in surge suppression clips overvoltages from switching in the network. The enclosure is designed for wall mounting next to the appliance it protects.
How to choose
The rating is chosen by the appliance current: 12 A for lower-power air conditioners and refrigerators, 15 A for larger split systems. If the mains voltage drops below 145 V, the A/C-Right L will switch off too often, and then it is better to take the SVS…-22E with an input from 110 V. To feed several air conditioners at once, the wall-mounted SVS WM or three-phase models are suitable.
Request a price and lead time
A/C-Right L — stabilizer for household appliances 12–15 A. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What is the input voltage range of the A/C-Right L?
The stabilizer works at 145–270 V on the input. Outside this range the AVS function switches the load off.
Why does an air conditioner need a 3-minute start delay?
Within 3 min the pressure in the refrigerant circuit equalizes, and the compressor starts without overloading the motor. The delay applies after every restoration of the mains.
How do the A/C-Right L at 12 A and at 15 A differ?
The main difference is the rated load current, 12 or 15 A. The input range of 145–270 V and the AVS and TimeSave functions are the same for both.
Is the A/C-Right L stabilizer suitable for a refrigerator?
Yes, it is designed for refrigerators and air conditioners; the 3 min delay protects the compressor from restarting under pressure.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.