Ministatic TS / TST — electronic line conditioners, 0.5–24 kVA
Country: Italy · Model: Ministatic TS / TST
Ministatic TS / TST are electronic line conditioners for 0.5–24 kVA with an isolation transformer and filters. TS units are single-phase at 0.5–4 kVA and TST units are three-phase at 12–24 kVA. They are meant for sensitive electronics and automation.
- Power
- TS single-phase 0.5–4 kVA; TST three-phase 12–24 kVA
- Accuracy
- ±3 %
- Response time
- < 2 ms/V
- Regulator efficiency
- > 99 %
Technical specifications
| Power | TS single-phase 0.5–4 kVA; TST three-phase 12–24 kVA |
|---|---|
| Accuracy | ±3 % |
| Response time | < 2 ms/V |
| Regulator efficiency | > 99 % |
| Common-mode noise rejection | > 110 dB up to 350 kHz |
| Composition | surge suppressor, RFI filters, isolation transformer, electronic regulator |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The unit contains a surge suppressor, RFI filters, an isolation transformer and an electronic regulator. The regulator reacts to a voltage change in less than 2 ms/V and its efficiency exceeds 99 %. Common-mode noise rejection is above 110 dB up to 350 kHz. Stabilization accuracy is ±3 %, a wider tolerance than the ±1 % RMS of Ministab / Sterostab stabilizers. The conditioner is therefore chosen where clean supply for sensitive equipment matters more than tight voltage tolerances. The isolation transformer separates the load from the mains galvanically. Sensitive electronics and automation react both to voltage swings and to noise, so the regulator and the filters are combined in one enclosure.
How to choose
Single-phase TS units are taken at 0.5–4 kVA and three-phase TST units at 12–24 kVA. The range between 4 and 12 kVA is not covered by this series, so for such loads Ministab M at 1–45 kVA or Ministab T at 3.5–32 kVA are closer. If accuracy better than ±3 % is required, turn to stabilizers with ±1 % RMS. When noise rejection matters more than accuracy, a conditioner is more appropriate than a stabilizer.
Request a price and lead time
Ministatic TS / TST — electronic line conditioners, 0.5–24 kVA. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What power ratings do Ministatic TS and TST conditioners have?
TS units are single-phase at 0.5–4 kVA and TST units are three-phase at 12–24 kVA.
What does a Ministatic line conditioner consist of?
Of a surge suppressor, RFI filters, an isolation transformer and an electronic regulator.
What are the regulator response time and efficiency?
Response time is less than 2 ms/V and regulator efficiency is above 99 %.
How well does the conditioner suppress common-mode noise?
Rejection exceeds 110 dB up to 350 kHz.
What is the voltage stabilization accuracy of Ministatic?
Accuracy is ±3 %. For tighter tolerances there are stabilizers with ±1 % RMS accuracy.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.