TSP precision voltage stabilizer ±0.1%, 1–100 kVA
Country: · Model: TSP
TSP is an electromechanical voltage stabilizer of increased accuracy, ±0.1% over a 1–100 kVA range, with a 230 V (1 phase) or 400 V (3 phase) output. It is intended for medical imaging, laboratory and diagnostic systems, calibration laboratories and clean rooms. Made in the United Kingdom.
- Stabilization accuracy
- ±0.1%
- Power
- 1–100 kVA (larger on request)
- Output voltage
- 230 V (1 phase) or 400 V (3 phase)
- Input voltage range
- from ±9% to ±45.5%
Technical specifications
| Stabilization accuracy | ±0.1% |
|---|---|
| Power | 1–100 kVA (larger on request) |
| Output voltage | 230 V (1 phase) or 400 V (3 phase) |
| Input voltage range | from ±9% to ±45.5% |
| Response time | typically < 10 ms |
| Waveform distortion | none (mechanical regulation, no semiconductors) |
| Cooling | natural air |
| Degree of protection | IP20, steel enclosure (options IP00–IP65) |
| Operating temperature | 0…+45 °C |
| Certification | UKCA, CE |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
Voltage is corrected by a mechanical regulating unit with no semiconductors, so the stabilizer adds no waveform distortion. The input range runs from ±9% to ±45.5%, which means it rides through deep sags and overvoltage while holding ±0.1% at the output. Typical response time is under 10 ms. Cooling is natural air. The standard steel enclosure is rated IP20, and versions from IP00 to IP65 can be ordered. Operating temperature is 0…+45 °C. Certification covers UKCA and CE.
How to choose
Rated power decides first. The range covers 1–100 kVA, and larger units are built to order. Then match the supply, since the single-phase version gives 230 V and the three-phase version 400 V. If ±0.1% is more than you need and the mains is unstable, look at the TS series with a default accuracy of ±0.55%. For dusty or damp rooms the TSO in an enclosure up to IP65 from 5 kVA fits better, and for ratings up to 400 kVA there is the solid-state SVR series with a 20 ms response.
Request a price and lead time
TSP precision voltage stabilizer ±0.1%, 1–100 kVA. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What stabilization accuracy does the TSP give?
Output voltage is held within ±0.1%. That is a precision level suited to medical imaging and calibration laboratories.
What input voltage range does the TSP accept?
From ±9% to ±45.5%. Typical response time is under 10 ms.
Does the TSP distort the voltage waveform?
No. Regulation is mechanical with no semiconductors, so the sine wave shape is left unchanged.
What power and output voltage does the TSP offer?
The range covers 1–100 kVA, with larger units on request. Output is 230 V for one phase or 400 V for three phases.
What protection rating and operating temperature does the TSP have?
IP20 in a steel enclosure as standard, with options from IP00 to IP65. Operating temperature is 0…+45 °C.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.