Voltage Controller VC6K-1P-000 single-phase voltage regulator, 230 V, 25 A
Country: Finland · Model: VC6K-1P-000
The single-phase voltage regulator VC6K-1P-000 is rated for 230 V and 25 A rated current, with a correction range of −10…+15 %. It is installed near the consumer connection point on long single-phase lines where the voltage drifts from nominal. No setting is needed, and it comes with a pole bracket.
- Network
- 1 phase, 230 V
- Rated current
- 25 A
- Correction range
- −10…+15 % (stepwise, automatic)
- Degree of protection
- IP54
Technical specifications
| Network | 1 phase, 230 V |
|---|---|
| Rated current | 25 A |
| Correction range | −10…+15 % (stepwise, automatic) |
| Degree of protection | IP54 |
| Insulation | double, no earthing |
| Dimensions / weight | 400×600×350 mm / 30 kg |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
Correction is stepwise and automatic within −10…+15 %, so nobody has to adjust anything. The enclosure has degree of protection IP54, the insulation is double, and no earthing is needed. Dimensions are 400×600×350 mm and weight is 30 kg, a load on the pole to be taken into account at installation. The network is single-phase, 230 V; on long single-phase lines the regulator is placed closer to the consumer. For a consumer at the end of a long line this means that the voltage at the input of the equipment stays closer to nominal.
How to choose
The model is chosen by network and current. VC6K-1P-000 works in a single-phase 230 V network and is rated for 25 A, so the consumer load on this line must not exceed that current. For three-phase 0.4 kV networks there is the phase balancer PB50A-3P-200ADV, 50 A, 230/400 V, IP55, with Modbus RTU (RS-232) communication. Its dimensions are 435×785×430 mm and weight 125 kg.
Request a price and lead time
Voltage Controller VC6K-1P-000 single-phase voltage regulator, 230 V, 25 A. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What voltage and current is the VC6K-1P-000 regulator rated for?
A single-phase 230 V network and 25 A rated current.
Within what limits does the regulator correct the voltage?
−10…+15 %, stepwise and automatically. No setting is needed.
What are the degree of protection and the type of insulation?
IP54, double insulation, no earthing needed.
What are the dimensions and weight of the regulator?
400×600×350 mm and 30 kg. The pole bracket is supplied with the unit.
Is it suitable for a three-phase network?
No, it is a single-phase 230 V device. For a three-phase 230/400 V network there is the phase balancer PB50A-3P-200ADV, 50 A.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.