Plasma Cutter 70 CT manual air plasma cutting machine 70 A
Country: Germany · Model: Plasma Cutter 70 CT
A portable 70 A plasma cutter for steel, stainless steel, aluminium and copper up to 35 mm thick. Plasma Cutter 70 CT is used for installation and repair work, on construction sites, in metal structure production and in workshops.
- Cutting current
- 70 A
- Separation cutting
- up to 35 mm
- Quality cutting
- up to 25 mm
- Piercing
- up to 15 mm
Technical specifications
| Cutting current | 70 A |
|---|---|
| Separation cutting | up to 35 mm |
| Quality cutting | up to 25 mm |
| Piercing | up to 15 mm |
| Compressed air | 4.1–6.5 bar, manual adjustment with LED indication |
| Modes | 3 |
| Ignition | contact, without HF interference |
| Materials | steel, stainless steel, aluminium, copper |
| Versions | with manual torch; with manual and machine torch and remote start (10 m cable) |
| Other | suitable for operation from a generator |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The machine runs on compressed air, and the pressure in the range of 4.1–6.5 bar is set manually using the LED display. The arc is ignited by contact and burns steadily, so the cut edge is even, and control is reduced to three operating modes. The sturdy housing stands on non-slip feet, and the machine can be powered from a generator, so it is suitable for a construction site without a fixed power supply. The design is compact, and the ergonomic torch tires the hand less during a long shift. The machine can pierce holes in metal up to 15 mm. A STABLECUT kit for manual plasma with a torch guide, a plasma torch holder and a case is offered as an accessory.
How to choose
Separation cutting up to 35 mm is used for scrap and rough cutting, and blanks with a clean edge are obtained at thicknesses up to 25 mm. The version with only a manual torch is taken for manual work, and the kit with a machine torch, remote start and a 10 m cable is needed for a portable machine. If the metal is thicker or machine cutting on a CNC table is required, Plasma Cutter 125 at 20–125 A with a clean cut up to 40 mm and separation cutting up to 57 mm is the better choice.
Request a price and lead time
Plasma Cutter 70 CT manual air plasma cutting machine 70 A. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What metal thickness does Plasma Cutter 70 CT cut?
Separation cutting is possible up to 35 mm, quality cutting up to 25 mm, and piercing holes up to 15 mm. This applies to steel, stainless steel, aluminium and copper.
What compressed air pressure does a 70 A plasma cutter need?
The compressor must supply air at a pressure of 4.1–6.5 bar. The pressure is adjusted manually and checked with the LED indication on the machine panel.
Can Plasma Cutter 70 CT be operated from a generator?
Yes, the machine is suitable for generator power. Contact arc ignition does not create high-frequency interference for electronic devices nearby.
How can a manual plasma cutter be mounted on a portable cutting machine?
For this, order the version with an additional machine torch, remote start and a 10 m connecting cable. In this kit the machine works on the PortaCut 3-in-1 machine.
How can a straight cut or bevel be made evenly with manual plasma?
The STABLECUT kit helps, with a guide that is attached to the workpiece by magnets. The torch is moved along the rail to get a straight cut or bevel without an electric machine.
Similar products
Fortis 270 / 320 / 400 / 500MIG/MAG welding power source 270–500 A (multiprocess)
TPS/i (270i C, 320i C, 320i, 400i, 500i, 600i)MIG/MAG welding system 270–600 A
iQ 1500 / iQ 3000 / iQ 4500iQ 1500 / iQ 3000 / iQ 4500 high-precision plasma systems 20–450 A for CNC cutting
Smart Focus 130 / 200 / 300 / 400Smart Focus 130 / 200 / 300 / 400 plasma systems 35–400 A for machine cuttingREQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.