DV UP-H and flux equipment, wire feeder for manual submerged arc welding, flux feed and suction
Country: Germany · Model: DV UP-H
The DV UP-H is a wire feeder for manual, that is semi-mechanised, submerged arc welding at a current up to 500 A at a 100 % duty cycle. It works with solid steel wire 0.6–2.0 mm, chromium-nickel wire 0.8–2.0 mm and flux-cored wire 1.0–2.4 mm, and weighs 25 kg. Separate flux equipment is offered for KA series machines.
- Welding current (DV UP-H)
- up to 500 A at duty cycle 100 %
- Steel wire
- 0.6–2.0 mm
- CrNi wire
- 0.8–2.0 mm
- Flux-cored wire
- 1.0–2.4 mm
Technical specifications
| Welding current (DV UP-H) | up to 500 A at duty cycle 100 % |
|---|---|
| Steel wire | 0.6–2.0 mm |
| CrNi wire | 0.8–2.0 mm |
| Flux-cored wire | 1.0–2.4 mm |
| Mass | 25 kg |
| Flux equipment | «Variable Pulverausrüstung»: flux feed and suction for welding machines |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The welder guides the submerged arc welding torch by hand. This is used where fitting a tractor or head is impractical, on short and curved welds, in repair, on site assembly and in one-off production. The advantages of the process remain, namely a high deposition rate and no open arc or spatter. The source is a GTH rectifier or a KSI inverter. The flux equipment feeds flux into the welding zone and sucks away the unmelted remainder for KA series machines and welding installations. It is configured for the specific machine and installation layout, and no technical parameters are given on the manufacturer's page.
How to choose
A current of 500 A at a 100 % duty cycle and wire up to 2.0 mm show that the feeder is made for the manual process, not for heavy welds. For welds with wire up to 5 mm and a current up to 1200 A take the KA 1-UP machine or the KA 2-UP head. For a welding cell with a robot there is the SAW Cobot. The source is selected by current, for example the GTH 802 up to 800 A or the KSI 700 up to 750 A.
Request a price and lead time
DV UP-H and flux equipment, wire feeder for manual submerged arc welding, flux feed and suction. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What wire can be fed by the DV UP-H?
Solid steel 0.6–2.0 mm, chromium-nickel 0.8–2.0 mm and flux-cored 1.0–2.4 mm.
What current is the DV UP-H rated for?
Up to 500 A at a 100 % duty cycle.
How much does the DV UP-H feeder weigh?
25 kg.
When is manual submerged arc welding more appropriate than a tractor?
On short and curved welds, in repair, on site assembly and in one-off production.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.