Artis 170 / 210 / 300 — TIG DC welding power source
Country: Austria · Model: Artis 170 / 210 / 300
Compact mobile Artis inverters for TIG DC are made for 170, 210 and 300 A with a 40 % duty cycle at maximum current, which means four minutes of continuous welding. Digital resonant control compensates for mains voltage fluctuations and drops and keeps the arc stable. The machines are designed for installation and repair work, welding of stainless steel and pipes, and workshops with manual TIG.
- Welding current
- 170 / 210 / 300 A
- Duty cycle at maximum current
- 40 % (at 40 °C)
- Mains voltage
- Artis 170/210: 96–265 V (XT); Artis 300 — three-phase mains
- Cooling
- gas (170/210), gas or water (300)
Technical specifications
| Welding current | 170 / 210 / 300 A |
|---|---|
| Duty cycle at maximum current | 40 % (at 40 °C) |
| Mains voltage | Artis 170/210: 96–265 V (XT); Artis 300 — three-phase mains |
| Cooling | gas (170/210), gas or water (300) |
| Processes | TIG DC (HF, TIG Pulse 1–990 Hz, TAC), MMA (including cellulosic electrodes) |
| Weight / protection | 9.8 kg, IP23 (170/210) |
| Mains voltage Artis 300 XT | 180–633 V (brochure: 200–575 V), single-phase up to 300 A |
| Reduced consumption | Artis 170/210 — up to 40 % lower input power (according to the manufacturer) |
| Customs codes (for reference) | |
| HS code | 8515.39 |
| UKTZED code (Ukraine) | 8515399000 |
| CN code (EU) | 85153990 |
Specifications are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
Artis 170 and Artis 210 have gas torch cooling, work in 96–265 V networks, withstand a 30 % voltage deviation at maximum power and weigh 9.8 kg. Their housing has IP23 protection, a protection circuit against connection to 400 V and a Power Plug connector for replacing the mains cable. Artis 300 is gas or water cooled, holds a 40 % duty cycle at an ambient temperature of 40 °C and tolerates 10 % mains fluctuations. The XT versions have PFC power factor correction and are fully compatible with generators, and the power components are covered by a reusable dust filter. For TIG there are HF and touch ignition, TIG Pulse 1–990 Hz, TAC tacking saving up to 50 % of time, spot and intermittent welding and automatic calculation of gas purging. The MMA mode has pulse, HotStart and a characteristic for cellulosic electrodes. More than 10 parameters are set with a knob without nested menus, Artis 300 adds 5 EasyJobs, and Up/Down torches and pedals connect through the TIG Multi Connector.
How to choose
The choice depends on current and mains. For thin-walled stainless steel and on-site work from a single-phase supply, Artis 170 or 210 is enough; for thicker parts and long welds, Artis 300 with water cooling is taken. Artis 300 XT works in 180–633 V networks (200–575 V according to the brochure) and delivers up to 300 A single-phase, depending on the mains protection. When MIG/MAG must be added to TIG in one machine, look at the multiprocess Fortis with TIG DC 3–500 A.
Request a price and lead time
Artis 170 / 210 / 300 — TIG DC welding power source. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What is the duty cycle of the Artis 210?
At the maximum current of 210 A the duty cycle is 40 %, which means four minutes of continuous welding. For Artis 300 this value is given at an ambient temperature of 40 °C.
Does the Artis work from a generator?
The XT versions have PFC power factor correction and are fully compatible with generators. Artis 170/210 also tolerate a 30 % mains voltage deviation at maximum power.
What pulse frequency does TIG Pulse have in the Artis?
The pulse mode is adjustable within 1–990 Hz, which helps on thin sheet. TAC tacking reduces tacking time by up to 50 %.
How much input power do the Artis 170/210 save?
According to the manufacturer, Artis 170/210 consume up to 40 % less input power. The inverter with digital resonant control makes maximum use of the input voltage.
Similar products
iQ 1500 / iQ 3000 / iQ 4500iQ 1500 / iQ 3000 / iQ 4500 high-precision plasma systems 20–450 A for CNC cutting
Smart Focus 130 / 200 / 300 / 400Smart Focus 130 / 200 / 300 / 400 plasma systems 35–400 A for machine cutting
SmartSYNCPlasma torches with RFID for Powermax SYNC
Duramax / Duramax Lock / Duramax HyampPlasma torches for PowermaxREQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.