MATERIALS, ADHESIVES AND COATINGS
UV605–UV7141 ultraviolet-cure adhesives for glass, metals and plastics (including dual UV/anaerobic cure)
Country: United Kingdom · Model: UV605–UV7141
The one-component acrylate adhesives UV605–UV7141 cure in seconds under UV or visible radiation and bond glass, metals and plastics. The hardness of the cured layer is 40–75 Shore D, tensile strength 8–25 MPa. The compound stays liquid while the parts are aligned, which gives precise positioning.
- For glass
- UV605 (75 mPa·s, 14 MPa), UV610 (glass-metal, 17 MPa), UV620 (optically clear), UV625 (non-sagging)
- For plastics
- UV630M, UV632 (acrylic), UV639 (PETG, 20 MPa), UV640M, UV643 (rigid plastics and metal, 23 MPa), UV645M, UV648, UV649M (thixotropic gel)
- Special
- UV670, flexible for metals and metallized plastics; UV681/683, tack-free coating, potting; UV6160, crystal clear; UV6231, resistant to harsh conditions; UV7141, dual UV/anaerobic cure; 130UV/135UV, UV cyanoacrylates
- Hardness
- 40–75 Shore D
Technical specifications
| For glass | UV605 (75 mPa·s, 14 MPa), UV610 (glass-metal, 17 MPa), UV620 (optically clear), UV625 (non-sagging) |
|---|---|
| For plastics | UV630M, UV632 (acrylic), UV639 (PETG, 20 MPa), UV640M, UV643 (rigid plastics and metal, 23 MPa), UV645M, UV648, UV649M (thixotropic gel) |
| Special | UV670, flexible for metals and metallized plastics; UV681/683, tack-free coating, potting; UV6160, crystal clear; UV6231, resistant to harsh conditions; UV7141, dual UV/anaerobic cure; 130UV/135UV, UV cyanoacrylates |
| Hardness | 40–75 Shore D |
| Tensile strength | 8–25 MPa |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The condition is simple: at least one part must transmit the radiation, otherwise a dual-cure grade is needed. For glass there are the UV605 (75 mPa·s, 14 MPa), the UV610 for a glass-metal pair (17 MPa), the optically clear UV620 and the UV625, which does not run off vertical surfaces and fills large gaps. For plastics there are the UV630M, the UV632 with adhesion to acrylic, the UV639 for PETG (20 MPa), the UV640M, UV645M, UV648, the thixotropic gel UV649M and the UV643 for rigid plastics and metal (23 MPa). Among the special ones, the UV670 is flexible, the UV681 and UV683 give a tack-free coating and "dome-shaped" potting, the UV6160 is crystal clear, and the UV6231 is resistant to harsh conditions. The UV7141 has dual UV/anaerobic cure, bonds glass with a ceramic coating, mirrors, and glass to metal (20 MPa), and post-cures in shaded areas. The 130UV and 135UV are cyanoacrylates with additional UV cure.
How to choose
First find out what is being bonded. Glass and a glass-metal pair are covered by the UV605, UV610, UV620 and UV625, plastics by the UV630M–UV649M, and metal with rigid plastic by the UV643. If the parts are opaque or there are shaded places, take the UV7141 or the 130UV and 135UV. When there is no UV lamp, see the cyanoacrylate 910, which fixes in about 10 s.
Request a price and lead time
UV605–UV7141 ultraviolet-cure adhesives for glass, metals and plastics (including dual UV/anaerobic cure). We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What should be done if neither part transmits UV?
Take the dual-cure grade UV7141 with UV and anaerobic mechanisms, which post-cures in shaded areas. There are also the UV cyanoacrylates 130UV and 135UV.
Which adhesive should be used for glass to metal?
The UV610 gives 17 MPa for a glass-metal pair, and the UV7141 gives 20 MPa and is also suitable for mirrors and glass with a ceramic coating.
Which UV adhesive suits PETG?
The UV639, strength 20 MPa. For rigid plastics and metal there is the UV643 at 23 MPa.
What are the hardness and strength of the cured layer?
Depending on the grade, hardness is 40–75 Shore D and tensile strength 8–25 MPa.
How does the UV625 differ from the UV605?
The UV605 is low-viscosity (75 mPa·s), while the UV625 does not run and suits large gaps and vertical surfaces.
Similar products
C-RAM RGD / KR / KRS / KFS / VHPC-RAM RGD / KR / KRS / KFS / VHP rigid and cast iron-epoxy and iron-silicone absorbers, radar-absorbing paints
C-RAM EVA / SFC-MP / ODP / CFCC-RAM EVA / SFC-MP / ODP / CFC higher-power, ventilated, all-weather and cleanroom pyramidal absorbers
UV15DC80 / UV22DC80-1 / UV26DC / LED401 / LED422DC90Dual-Cure Systems (UV/LED + Heat) for Shadow Areas
EP21TP-2NV / EP21TPFL-1 / EP21TPHT / EP30D-7 / Super Gel 9Epoxy-Polysulfide and Urethane-Modified Flexible SystemsREQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.