BATTERY MANAGEMENT SYSTEMS (BMS)
Lynx Smart BMS / Lynx Smart BMS NG — battery management system 500/1,000 A
Country: Netherlands · Model: Lynx Smart BMS / Lynx Smart BMS NG
The Lynx Smart BMS is rated 500 or 1,000 A and slots straight into the Lynx distribution busbar. It is the most capable BMS in the maker’s range and works with Lithium Battery Smart and Lithium NG batteries in stationary and marine systems with high currents.
- Current
- 500 A and 1,000 A
- Functions
- BMS, contactor, shunt monitor, pre-alarm
- Compatibility
- Lithium Battery Smart / Lithium NG
- Communication
- Bluetooth, GX, VRM
Technical specifications
| Current | 500 A and 1,000 A |
|---|---|
| Functions | BMS, contactor, shunt monitor, pre-alarm |
| Compatibility | Lithium Battery Smart / Lithium NG |
| Communication | Bluetooth, GX, VRM |
| Customs codes (for reference) | |
| HS code | 8537.10 |
| UKTZED code (Ukraine) | 8537109890 |
| CN code (EU) | 85371098 |
Specifications are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
The enclosure combines the BMS, a power contactor and a battery shunt monitor, so no separate monitor or main disconnect goes into the circuit. The contactor disconnects the bank from loads and chargers when cells go outside safe limits. Before disconnecting, the system sends a pre-alarm so the operator can reduce the load or start a generator. Lynx modules bolt together by their busbars, and the BMS becomes part of the same assembly as the load fuses. The NG version is for Lithium NG batteries, the standard one for Lithium Battery Smart. Settings and data are available over Bluetooth, through a GX controller and on the VRM portal, which shows cell voltages, current and state of charge.
How to choose
The rating follows the total current of inverters and loads on the busbar. Up to 500 A the smaller version is enough, while several 48 V inverters or a heavy 12 V load call for 1,000 A. A small 12 V system in a van or boat is easier with the Smart BMS CL 12-100 or Smart BMS 12-200 and their alternator current limiter. If a bank of up to 1,500 Ah at 48 V only feeds MultiPlus or Quattro units over VE.Bus, the VE.Bus BMS without a contactor will do.
Request a price and lead time
Lynx Smart BMS / Lynx Smart BMS NG — battery management system 500/1,000 A. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What current ratings does the Lynx Smart BMS come in?
500 A and 1,000 A, chosen by the total current on the busbar.
Which batteries does the Lynx Smart BMS work with?
With Lithium Battery Smart and Lithium NG batteries.
Does the Lynx Smart BMS have a built-in shunt?
Yes, the enclosure contains a shunt monitor and a contactor rated 500 or 1,000 A.
What does the pre-alarm in the Lynx Smart BMS do?
It warns that the contactor is about to disconnect the bank, so the operator has time to cut the load.
Can the Lynx Smart BMS be monitored remotely?
Yes, a GX controller sends the data to the VRM portal, and near the battery it is visible over Bluetooth.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.