Energy Manager — energy management system for commercial storage
Country: Germany · Model: Energy Manager
The local Energy Manager controller, running software version 3.2, operates the battery, generators and loads by preset scenarios and uploads data to the myTESWORLD cloud portal. It serves as the EMS for commercial sites with batteries that need peak shaving, self-consumption and zero export.
- Components
- local Energy Manager controller + myTESWORLD cloud portal
- Functions
- self-consumption optimization, peak shaving, zero export, load and generation control
- Zero export
- VDE FNN certification
- Installation
- in the meter cabinet or in the Back-up Control Box
Technical specifications
| Components | local Energy Manager controller + myTESWORLD cloud portal |
|---|---|
| Functions | self-consumption optimization, peak shaving, zero export, load and generation control |
| Zero export | VDE FNN certification |
| Installation | in the meter cabinet or in the Back-up Control Box |
| Software version | 3.2 |
| Customs codes (for reference) | |
| HS code | 9032.89 |
| UKTZED code (Ukraine) | 9032890000 |
| CN code (EU) | 90328900 |
Specifications are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
Setup is done through a web interface, so no dedicated laptop software is needed during commissioning. Using metering data at the grid connection point, the controller decides when to charge the battery, when to discharge it and when to curtail PV output. The scenario set covers self-consumption optimization, peak shaving, zero export and control of loads and generation. Zero export is certified by VDE FNN, which matters wherever the grid operator forbids feeding energy into the grid. The unit mounts in the meter cabinet or in the Back-up Control Box, so no extra panel is built for it. The myTESWORLD portal keeps the operating history and opens site data for remote viewing.
How to choose
Pick Energy Manager when the battery serves one site behind one grid connection and the task is self-consumption and load peaks. Battery parks above 5 MWh with grid operator requirements and trading schedules need the Energy Controller Pro L, certified to VDE-AR-N 4110 and 4120. Decide the mounting point early, either the meter cabinet or the Back-up Control Box when the site takes backup power from the battery.
Request a price and lead time
Energy Manager — energy management system for commercial storage. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What functions does Energy Manager perform?
It optimizes self-consumption, shaves peaks, holds zero export and controls loads and generation. Scenarios are set through the web configuration.
Is the zero export function of Energy Manager certified?
Yes, zero export carries VDE FNN certification. It is switched on wherever feeding energy into the grid is not permitted.
Where is the Energy Manager controller mounted?
In the meter cabinet or in the Back-up Control Box. A separate panel for the controller is not required.
What is the myTESWORLD portal for?
It is the cloud portal where Energy Manager sends site data. Operators use it to check battery history and system status remotely.
Which software version does Energy Manager run?
The current specification refers to software version 3.2.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.