I/O system 1000 and x750 gateway input/output modules
Country: Germany · Model: I/O system 1000 / x750
The I/O system 1000 is a modular input/output system for DIN rail, with modules 12.5 mm wide and 8 connection points. A head module EPM-S110, S120, S131 or S140 connects it to a CANopen, PROFIBUS, EtherCAT or PROFINET network. A separate x750 gateway links existing CAN networks to EtherCAT.
- Head modules
- EPM-S110 CANopen, EPM-S120 PROFIBUS, EPM-S131 EtherCAT, EPM-S140 PROFINET
- Modules
- digital with 2/4/8 inputs and outputs and others; width 12.5 mm, 8 connection points
- Mounting
- DIN rail
- x750 gateway
- EtherCAT–CAN, High Speed CAN up to 1 Mbit/s
Technical specifications
| Head modules | EPM-S110 CANopen, EPM-S120 PROFIBUS, EPM-S131 EtherCAT, EPM-S140 PROFINET |
|---|---|
| Modules | digital with 2/4/8 inputs and outputs and others; width 12.5 mm, 8 connection points |
| Mounting | DIN rail |
| x750 gateway | EtherCAT–CAN, High Speed CAN up to 1 Mbit/s |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The digital inputs EPM-S200…S210 come with 2, 4 or 8 channels, including with three-wire connection, negative switching, fast ones with a time of 2 µs and ones with a 0.5 ms filter. The digital outputs EPM-S300…S312 have 2, 4 or 8 channels for a 2 A current, relay ones for 230 V and fast 2 µs ones. The analogue inputs EPM-S400…S416 give 2 or 4 channels of 0…10 V, −10…+10 V and 0/4…20 mA, some of them 16-bit and galvanically isolated, and there are inputs for resistance thermometers, thermocouples and a strain gauge. A separate module measures a three-phase 230/400 V, 5 A mains. The analogue outputs EPM-S500…S505 have the same ranges, including 16 bit. There are 24 V modules for counters. The minimum cycle time together with time stamps is needed to read touch probe inputs for synchronous movements.
How to choose
First the head module is chosen for the controller bus, that is EPM-S110, S120, S131 or S140. Then the modules are selected by type and number of channels, and if a CAN network already runs in the machine and the controller speaks EtherCAT, the x750 gateway is installed instead of replacing equipment. In an EtherCAT network it behaves as an ordinary device, and the number of CAN nodes is limited only by the CANopen specification. The x750 gateway has High Speed CAN up to 1 Mbit/s, IP20 and a 24 V DC supply. Parameterisation and CANopen libraries are in PLC Designer, and remote access to the machine is provided by separate x500 IoT gateways.
Request a price and lead time
I/O system 1000 and x750 gateway input/output modules. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
How wide are the I/O system 1000 modules?
12.5 mm with 8 connection points, mounted on a DIN rail.
Which head module is needed for EtherCAT?
The EPM-S131. For CANopen the EPM-S110 is taken, for PROFIBUS the EPM-S120, for PROFINET the EPM-S140.
Which signals do the EPM-S400…S416 analogue inputs accept?
0…10 V, −10…+10 V and 0/4…20 mA on 2 or 4 channels, and there are also inputs for resistance thermometers, thermocouples and a strain gauge.
How can a CAN network be connected to EtherCAT?
Through the x750 gateway with a High Speed CAN interface up to 1 Mbit/s. It needs a 24 V DC supply.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.