OctoControl Pro — system controller and monitoring gateway
Country: Netherlands · Model: OctoControl Pro
A system controller powered from 8–32 V that runs individual devices and OctoPower systems and brings them into remote monitoring. It acts as a gateway between the equipment buses and a cloud service.
- Supply
- 8–32 V
- Consumption
- < 500 mA at 12 V
- Communication
- WhisperConnect, WPC bus, Lithium Power Plus
- Cloud
- yes, Ethernet (4G version)
Technical specifications
| Supply | 8–32 V |
|---|---|
| Consumption | < 500 mA at 12 V |
| Communication | WhisperConnect, WPC bus, Lithium Power Plus |
| Cloud | yes, Ethernet (4G version) |
| Monitor | OctoView, HDMI/USB |
| Customs codes (for reference) | |
| HS code | 9032.89 |
| UKTZED code (Ukraine) | 9032890000 |
| CN code (EU) | 90328900 |
Specifications are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
The controller connects to the WhisperConnect and WPC bus networks and sees Lithium Power Plus batteries directly. WPC inverter-chargers, which offer a WPC/CAN bus as an option, talk to it over the WPC bus. Data goes to the cloud over Ethernet, and a 4G modem version serves sites without wired internet, such as a vessel at sea or a remote station. An OctoView monitor connects through HDMI and USB, so system status can be read on site without a phone or laptop. Own consumption is below 500 mA at 12 V, so the controller can stay on permanently, even through a long lay-up on batteries. The 8–32 V supply range covers both 12 and 24 V onboard networks, and the controller is fed straight from the bank.
How to choose
The controller earns its place when a system has several nodes that have to be watched remotely or run under shared logic. Pick the version by link type, Ethernet where the site has a network, 4G where there is no cable. Check beforehand that the equipment uses supported buses, meaning WPC units with the WPC/CAN option, Lithium Power Plus banks and nodes with WhisperConnect. For a simple pairing of a WP-Sine and one Lithium Power Basic the controller is usually more than needed.
Request a price and lead time
OctoControl Pro — system controller and monitoring gateway. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What supply voltage does the OctoControl Pro need?
From 8 to 32 V, so it can run from a 12 or 24 V onboard network.
How much current does the OctoControl Pro draw?
Less than 500 mA at 12 V.
How does the OctoControl Pro send data to the cloud?
Over Ethernet, and there is a version with a 4G modem.
What equipment does the OctoControl Pro work with?
With devices on the WhisperConnect and WPC bus networks, OctoPower systems and Lithium Power Plus batteries.
Can OctoControl Pro data be shown on a local screen?
Yes, an OctoView monitor connects to the controller through HDMI and USB.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.