DC-DC CONVERTERS AND BATTERY CHARGERS
Omnicharge OC / OC2 — programmable battery charger 12/24/48 V, 20–90 A
Country: Netherlands · Model: Omnicharge OC / OC2
Omnicharge OC / OC2 industrial programmable chargers serve three battery banks through 3 full-power outputs. Output is 12 V (40–90 A), 24 V (20–80 A) or 48 V (40 A). They go where the battery bank is large and charging must follow the battery maker’s program, on vessels, telecom sites, backup power and warehouse equipment.
- Output
- 12 V (40–90 A), 24 V (20–80 A), 48 V (40 A)
- Outputs
- 3 full-power outputs
- Input
- 100–260 V AC with power factor correction
- Parallel operation
- up to 6 units
Technical specifications
| Output | 12 V (40–90 A), 24 V (20–80 A), 48 V (40 A) |
|---|---|
| Outputs | 3 full-power outputs |
| Input | 100–260 V AC with power factor correction |
| Parallel operation | up to 6 units |
| Programs | up to 8 charging stages |
| Customs codes (for reference) | |
| HS code | 8504.40 |
| UKTZED code (Ukraine) | 8504405500 |
| CN code (EU) | 85044060 |
Specifications are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
Each output carries full power, so the banks charge independently and a flat service battery does not hold back the starter battery. Mains input is 100–260 V AC with power factor correction, so the unit draws near-sinusoidal current and runs happily from a generator. Charging programs run up to 8 stages, with voltage and time of each stage set from the battery datasheet, whether lead-acid or lithium. When one unit is not enough, up to 6 can run in parallel. That builds up the current needed for large battery banks, such as traction or station batteries.
How to choose
Pick the voltage by the bank and the current by capacity and the battery’s allowed charge current, with 12 V models from 40 to 90 A, 24 V from 20 to 80 A, and a 40 A model at 48 V. If one unit falls short, parallel operation builds the current, instead of hunting for a single larger charger. When ready-made profiles and up to 120 A at 12 V are enough, the WSC Li is simpler. For exposed machinery needing an IP65 housing, the CHAMP at 5–30 A fits.
Request a price and lead time
Omnicharge OC / OC2 — programmable battery charger 12/24/48 V, 20–90 A. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
How many Omnicharge units can run in parallel?
Up to 6 units, with system current growing with each unit added.
How many stages do the Omnicharge OC / OC2 charging programs have?
Up to 8 charging stages.
What current does the 48 V Omnicharge deliver?
40 A, while 12 V models give 40–90 A and 24 V models 20–80 A.
Is Omnicharge current split between its outputs?
No, all 3 outputs are full-power, and each battery bank charges independently.
What mains input does the Omnicharge need?
100–260 V AC, with a power factor corrected input.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.