DRIVES AND FREQUENCY CONVERTERS
b maXX 6300 next-generation single- and dual-axis servo modules with FSoE and IoT, up to 180/420 A
Country: · Model: b maXX 6300
The b maXX 6300 single- and dual-axis servo modules are rated for currents of 2 × 3…180 A and a peak current of up to 420 A. This is a development of the b maXX 5300 series with extended safety functions, software, PLC and IoT. The modules work in a system with a common DC link together with b maXX 5000/5100 power supply units.
- Types
- BM 6323…6328 (size 2), BM 6331…6335 (3), BM 6372…6376 (7)
- Rated current
- 2 × 3 … 180 A
- Peak current
- up to 420 A
- Typical motor power
- 2 × 1.6 … 97.2 kW
Technical specifications
| Types | BM 6323…6328 (size 2), BM 6331…6335 (3), BM 6372…6376 (7) |
|---|---|
| Rated current | 2 × 3 … 180 A |
| Peak current | up to 420 A |
| Typical motor power | 2 × 1.6 … 97.2 kW |
| Supply | from b maXX 5000/5100 units (mains 207–528 V AC, 50/60 Hz) |
| PWM frequency | 4 / 8 kHz |
| Safety | from hardware STO to functions via FailSafe over EtherCAT (FSoE) |
| Encoders | resolver, optical, digital — all standard interfaces |
| Cooling | air, cold plate, water push-through |
| Certification | CE, cUL |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The b maXX 5000/5100 power supply and regeneration units and the axis modules are connected by the drive connect system, so installation and commissioning are faster. The dual-axis BM 6323 and 6325, 50 mm wide, have 2 × 3…8.5 A (peak 2 × 9…18 A), and the single-axis BM 6326–6328 give 12–30 A, that is 6.5–16.2 kW. Size 3, 75 mm wide, contains the dual-axis BM 6331–6333 for 2 × 12…30 A and the single-axis BM 6334/6335 for 40 and 60 A. Size 7, 175 mm wide, covers BM 6372–6376 for 90–180 A with a peak of up to 420 A and 48.6–97.2 kW. The mains is 207–528 V AC, 50/60 Hz, the electronics are powered from 24 V DC, and the PWM frequency is 4/8 kHz. Cooling is by air, via a cold plate or by water push-through. The encoder can be a resolver, optical or digital, and safety ranges from hardware STO to FSoE. Programming is in ProDrive and ProMaster, manual 5.24007, certification CE, cUL.
How to choose
The module is selected by the axis rated current and the peak needed in the cycle. Small axes are covered by the dual-axis BM 6323 or 6325, and from 90 A per axis size 7 is needed. The 6000 generation scales with its equipment, so safety, encoder and inputs-outputs are chosen for the task. If FSoE and IoT are not needed, the same currents are given by the previous series b maXX 5300, and a monoblock without a common link up to 315 kW is b maXX 6500.
Request a price and lead time
b maXX 6300 next-generation single- and dual-axis servo modules with FSoE and IoT, up to 180/420 A. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What current do b maXX 6300 modules have?
Rated 2 × 3…180 A, peak up to 420 A. The typical motor power is 2 × 1.6…97.2 kW.
How does b maXX 6300 differ from b maXX 5300?
The newer series has wider safety functions, software and IoT, while the power ranges remain the same.
What powers the axis modules?
From b maXX 5000/5100 units via the DC link; the unit takes the mains of 207–528 V AC.
What safety levels are available?
From hardware STO to extended functions via FailSafe over EtherCAT (FSoE) at the highest safety level.
Similar products
TMdrive-10e2Low-voltage system VFD 460/575/690 V (including SPR and DP)
Perfect PitchElectric blade pitch systems for wind turbines 0.75–15 MW
FRENIC-MEGA (G2)General-purpose frequency converter 0.4–710 kW, 200/400 V
Commander / Unidrive M / Powerdrive MD Smart / DigistartLV frequency converters (Commander, Unidrive M, Powerdrive MD Smart) and Digistart D4/D5 soft startersREQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.