DRIVES AND FREQUENCY CONVERTERS
b maXX 5500 / 5600 / 5700 monoblock servo converters up to 315 kW, peak and rated versions up to 800 A
Country: · Model: b maXX 5500 / 5600 / 5700
The b maXX 5500 monoblock servo converters together with the 5600 and 5700 versions serve motors of 1.1–315 kW at currents of 2.5–615 A, with a maximum of up to 800 A. They are used with DST2, DS2 or DA1 motors on extruders, casting machines, servo presses, shredders and printing machines.
- b maXX 5500
- BM 5512…5573: 2.5–615 A (max. up to 800 A), motors 1.1–315 kW, 7 sizes, overload 2.0–1.3
- b maXX 5600 (peak load)
- BM 5632-F…5662-F: 60–300 A, max. 120–600 A, overload 2 (1 s in a 5 s cycle)
- b maXX 5700 (rated load)
- BM 5755-F, 5766-F, 5773-F: 260, 450, 720 A (max. 800 A)
- Mains
- 207–528 V AC, nominal 400 V, 50/60 Hz
Technical specifications
| b maXX 5500 | BM 5512…5573: 2.5–615 A (max. up to 800 A), motors 1.1–315 kW, 7 sizes, overload 2.0–1.3 |
|---|---|
| b maXX 5600 (peak load) | BM 5632-F…5662-F: 60–300 A, max. 120–600 A, overload 2 (1 s in a 5 s cycle) |
| b maXX 5700 (rated load) | BM 5755-F, 5766-F, 5773-F: 260, 450, 720 A (max. 800 A) |
| Mains | 207–528 V AC, nominal 400 V, 50/60 Hz |
| DC link | 540 V |
| PWM frequency | 2 / 4 / 8 kHz |
| Cooling | air, push-through, water (stainless steel) |
| Certification | CE, CSA, UL |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The rectifier, the DC link capacitance and the inverter are combined in one housing. The 5500 series has seven sizes, from BM 5512 (2.5/5 A, motor 1.1 kW) and BM 5513 (4.5/9 A, 2 kW) through BM 5535 (60/90 A, 28 kW), BM 5546 (150/200 A, 75 kW) and BM 5566 (350/450 A, 175 kW) to BM 5572/5573 (450/585 and 615/800 A, 225 and 315 kW). The overload lies within 2.0–1.3. The mains is 207–528 V AC, nominal 400 V, the link is 540 V, and PWM is 2/4/8 kHz. Cooling is by air, push-through or built-in water cooling made of stainless steel. For extruders there is a sensorless synchronous mode and motors with a thrust bearing for axial forces up to 470 kN. Setup is in ProDrive, manual 5.13008, certification CE, CSA, UL.
How to choose
The 5600 version (BM 5632-F…5662-F) of 60–300 A with a peak of 120–600 A withstands a double overload of 1 s in a 5 s cycle, so it suits injection molding, extrusion and servo presses at the bottom point of the stroke. The 5700 version (BM 5755-F, 5766-F, 5773-F of 260, 450 and 720 A) is used for machines that need full power throughout the cycle. Both are more compact than the standard 5500 and come with water cooling. If the smallest installation volume matters, compare b maXX 6500 of 2.5–600 A.
Request a price and lead time
b maXX 5500 / 5600 / 5700 monoblock servo converters up to 315 kW, peak and rated versions up to 800 A. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
How do b maXX 5500, 5600 and 5700 differ?
5500 is designed for standard cycles, 5600 for short peaks, and 5700 for full load throughout the whole cycle.
How many sizes does the 5500 series have?
Seven, from BM 5512 to BM 5572/5573. The largest, BM 5573, has 615/800 A for a 315 kW motor.
What is the DC link voltage?
540 V with a mains of 207–528 V AC with a nominal of 400 V.
What axial force do motors for extruders withstand?
Motors with a built-in thrust bearing take axial forces up to 470 kN.
Similar products
TMdrive-10e2Low-voltage system VFD 460/575/690 V (including SPR and DP)
Perfect PitchElectric blade pitch systems for wind turbines 0.75–15 MW
FRENIC-MEGA (G2)General-purpose frequency converter 0.4–710 kW, 200/400 V
Commander / Unidrive M / Powerdrive MD Smart / DigistartLV frequency converters (Commander, Unidrive M, Powerdrive MD Smart) and Digistart D4/D5 soft startersREQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.