DSC2 45–100 compact new-generation servo motors up to 36 kW, 1000–5000 rpm
Country: · Model: DSC2
Compact new-generation permanent magnet synchronous servo motors DSC2, up to 36 kW in the range of 1000–5000 rpm. Compared with DSC1 their length has been reduced, so at the same power the motor is up to 15 % more compact than conventional servo motors. The series is used for moving axes, powder presses, packaging and textile machines.
- Type
- three-phase permanent magnet synchronous servo motor
- Frame sizes
- 045–100, six lengths (data published for DSC2-071)
- Speed
- 1000–5000 rpm
- DSC2-071
- 1.21–36 kW, M0 12.6–120 N·m, M0max 25–170 N·m, J 9.5–48.9 kg·cm²
Technical specifications
| Type | three-phase permanent magnet synchronous servo motor |
|---|---|
| Frame sizes | 045–100, six lengths (data published for DSC2-071) |
| Speed | 1000–5000 rpm |
| DSC2-071 | 1.21–36 kW, M0 12.6–120 N·m, M0max 25–170 N·m, J 9.5–48.9 kg·cm² |
| Compactness | up to 15 % shorter than conventional servo motors |
| Cooling | none, air, water |
| Degree of protection | up to IP65 regardless of cooling |
| Encoders | resolver, Hiperface DSL, Hiperface, EnDat 2.2 |
| Connection | rotatable connector or terminal box; single-cable technology |
| Options | brake, gearboxes |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The series is made in six lengths, and the DSC2-071 frame size has been published first. It gives 1.21–36 kW at 1000–5000 rpm, standstill torque M0 12.6–120 N·m and maximum torque M0max 25–170 N·m with a rotor moment of inertia of 9.5–48.9 kg·cm². The minimal cogging torque helps with precise positioning and control. There are versions without forced cooling, with air cooling and with water cooling, and the degree of protection reaches IP65 with any method. The housing is smooth, thin and solid. Lower material consumption reduces the carbon footprint of the product.
How to choose
For feedback, a resolver, Hiperface DSL, Hiperface and EnDat 2.2 are available. The main connection is made through a rotatable connector or a terminal box, and single-cable technology carries the power and encoder signal lines in one cable. The motor is supplied from b maXX servo converters on a 400 V mains. For DSC2-071, manual 5.22013 and technical documentation 5.22013T (2026) have been issued. If a torque of thousands of N·m is needed, up to 31 600 N·m, look at the high-torque DST2 series.
Request a price and lead time
DSC2 45–100 compact new-generation servo motors up to 36 kW, 1000–5000 rpm. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
How much more compact is DSC2 than conventional servo motors?
Up to 15 % shorter at the same power. This gain came from reducing the overall length compared with DSC1.
What degree of protection does DSC2 have?
Up to IP65 with any cooling method, that is, with no cooling, air or water.
What is known about the DSC2-071 parameters?
Power 1.21–36 kW at 1000–5000 rpm, M0 12.6–120 N·m, M0max 25–170 N·m, rotor inertia 9.5–48.9 kg·cm².
Is single-cable connection available?
Yes, single-cable technology is available, where power lines and encoder signals run in one cable.
Can the motor be fitted with a brake and gearbox later?
All types can have a brake. Custom gearboxes and different cooling systems and encoders are also offered.
Similar products
3.ZKELow-voltage IE3 induction motor, 18.5–1000 kW
2.RZKITLow-voltage induction motor for operation from a frequency converter, 18.5–2500 kW
HAW12 / HAW13 / HAW20 / HAW22 / HAW29Drilling induction motors 600–2000 hp, 575 V, for variable-frequency drive
IMfinity FLSESThree-phase LV induction motors in cast-iron frame IE3/IE4, 0.75–900 kWREQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.