High-Speed IC416 high-speed low-voltage induction motor 10–1050 kW up to 13 500 rpm
Country: Germany · Model: High-Speed IC416
Two-pole high-speed induction motor rated 10–1050 kW with IC416 air cooling. Speed ranges from 3600 rpm at 1050 kW to 13 500 rpm at 10 kW, supplied from a frequency converter only. Used in place of a combination with a speed increaser.
- Type
- induction, laminated rotor
- Power
- 10–1050 kW
- Voltage
- up to 0.69 kV
- Supply frequency
- up to 225 Hz (from converter)
Technical specifications
| Type | induction, laminated rotor |
|---|---|
| Power | 10–1050 kW |
| Voltage | up to 0.69 kV |
| Supply frequency | up to 225 Hz (from converter) |
| Speed | 3600 (1050 kW) – 13 500 (10 kW) rpm |
| Number of poles | 2 |
| Frame | 112–450 mm |
| Cooling | IC416 (air, independent fan) |
| Bearings | ball |
| Housing | grey cast iron |
| Protection degree | IP55 |
| Delivery time | 4–6 months (2024/2025 data) |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
Rated speed exceeds 3600 rpm, voltage up to 0.69 kV, supply frequency up to 225 Hz. Grey cast iron housing, frames 112–450 mm, laminated rotor and maintenance-free ball bearings. Design B3, protection degree IP55, cooling IC416 with an independent fan. The absence of a transmission reduces losses, takes less space and cuts maintenance, and precise speed control raises the accuracy of the process. According to the manufacturer's estimate such a drive has higher efficiency and lower total cost of ownership than a motor with a gearbox or a steam or gas turbine. The standard delivery time per 2024/2025 data is 4–6 months. Every motor undergoes factory tests. Typical loads are pumps, spindles, fans, blowers, compressors and test stands.
How to choose
Power and speed are linked here. The upper limit of 1050 kW corresponds to 3600 rpm, and 13 500 rpm is available at 10 kW. So first set the required speed at the machine shaft and determine the frame size from it. If power up to 50 MW at 0.69–11 kV is needed, there is the high-voltage water-cooled High-Speed Tailormade XL, given as a separate item. For speeds of 3000 rpm and below a standard series is suitable, for example W4.B / WE.B at 37–5500 kW.
Request a price and lead time
High-Speed IC416 high-speed low-voltage induction motor 10–1050 kW up to 13 500 rpm. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What speed does the IC416 high-speed motor have?
From 3600 rpm for 1050 kW to 13 500 rpm for 10 kW. The motor is two-pole, supply frequency up to 225 Hz.
Can this motor be started directly from the grid?
No, supply is always from a frequency converter. Voltage up to 0.69 kV.
Is a speed increaser needed?
No, a high-speed direct drive replaces the scheme with a motor and a gearbox, which reduces losses, occupied space and maintenance costs.
What cooling and protection degree does the motor have?
Air cooling IC416 with an independent fan, protection degree IP55, frames 112–450 mm.
Where are high-speed motors of this type used?
In pumps, spindles, industrial fans, blowers, compressors, on test stands and in special machines of the process industry.
Similar products
3.ZKELow-voltage IE3 induction motor, 18.5–1000 kW
2.RZKITLow-voltage induction motor for operation from a frequency converter, 18.5–2500 kW
HAW12 / HAW13 / HAW20 / HAW22 / HAW29Drilling induction motors 600–2000 hp, 575 V, for variable-frequency drive
IMfinity FLSESThree-phase LV induction motors in cast-iron frame IE3/IE4, 0.75–900 kWREQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.