FORCE ONE+ / FOX gas-powered fastening tool
Country: Spain · Model: FORCE ONE+ / FOX
The FORCE ONE+ gas-powered fastening tool with a shot energy of 105 J drives nails 13–40 mm long into concrete, steel and brick without drilling or plugs. It is used for mass fixing of cable ducts, junction boxes, clamps, clips and hangers to concrete ceilings in electrical and building services installation.
- Energy
- 105 J
- Nails
- 13–40 mm
- Magazine
- 20 or 40 nails
- Speed
- 2.8 nails/s
Technical specifications
| Energy | 105 J |
|---|---|
| Nails | 13–40 mm |
| Magazine | 20 or 40 nails |
| Speed | 2.8 nails/s |
| Battery life | ≈3000 nails per charge |
| Weight | 3.6 kg |
| Approvals | ETA in a system with XHA nails ≥22 mm |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The shot comes from combustion of a gas-air mixture from a replaceable cylinder, while the spark and the combustion chamber fan are powered by a built-in battery, so neither a compressor nor powder cartridges are needed on site. The FONEPLUS20 magazine holds 20 nails, the FONEPLUS40 is designed for 40, and the working rate reaches 2.8 nails per second. One battery charge lasts for about 3000 nails. The tool weighs about 3.6 kg (3.67 kg in the manufacturer's data sheet), and is 365 mm high and 124 mm wide. Besides concrete, the base material can be steel beams and purlins, concrete blocks, solid brick and wood. The warranty period is 2+2 years provided the tool is registered.
How to choose
For certified fixings the equipment set decides, because the European Technical Assessment ETA has been issued only for the combination of the FORCE ONE+ tool, XHA nails at least 22 mm long and branded fastening attachments. The nail length range is given as 15–40 mm in the description and as 13–40 mm in the specifications, so check the short length for a particular base material against the nail catalogue. The second model of the programme, the FOX, works with its own XHA and TKA nails and a gas cylinder shared with the AGII tool, and all consumables are collected on the XHA / TKA page.
Request a price and lead time
FORCE ONE+ / FOX gas-powered fastening tool. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What is the shot energy of the FORCE ONE+ gas-powered tool?
The shot energy is 105 J. This is enough to drive nails into concrete, steel, brick and other hard base materials without pre-drilling.
How many nails can be driven on one FORCE ONE+ battery charge?
About 3000 nails, because the battery powers only the spark and the chamber fan, while the shot energy comes from the gas cylinder.
Does the FORCE ONE+ gas-powered fastening tool have an ETA?
The ETA has been issued for the system, not for the tool alone. It applies only when the tool is used with XHA nails 22 mm or longer and with original attachments.
Where is the FORCE ONE+ gas-powered tool made?
It is made by a Spanish family group from near Barcelona, which has developed fasteners for more than 50 years and has plants in Spain, Germany, China, the USA and Mexico. Every day the group makes about 14 million screws and 1 million plastic plugs and supplies its products to more than 100 countries.
Similar products
TBE / TBE/D / MAL / RJATBE / TBE/D / MAL / RJA aluminium cable lugs and sleeves, 16–500 mm²
TBEM / TDC / TBF / MBITBEM / TDC / TBF / MBI bimetallic and tinned aluminium lugs and Al–Cu sleeves, 16–400 mm²
BRnylon cable ties and cable fixings
DIN 471 / 472 / 912 / 933 / 981 / 6885Slotted nuts, retaining rings, pins, keys, screws (DIN 471/472/912/933/981/6885, ISO 2338)REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.