ResiTHERM insulation fixings and stand-off system for facades
Country: Spain · Model: ResiTHERM
The ResiTHERM stand-off system in versions 8, 12, 16 and 37 fixes heavy attached elements to a facade through the insulation layer. The anchor passes right through the thermal insulation and sits in the load-bearing base, and the thermal separation module prevents a cold bridge. The same group includes plate plugs for insulation boards.
- Types
- plate plugs for insulation boards, fixings for insulated facades, ResiTHERM stand-off system
Technical specifications
| Types | plate plugs for insulation boards, fixings for insulated facades, ResiTHERM stand-off system |
|---|
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The system is installed on facades with bonded thermal insulation for awnings, pergolas, canopies, French balconies and equipment brackets. The load-bearing base is concrete, solid or hollow brick or masonry, and the ResiFIX injection mortar works in the anchor part. According to the manufacturer, this is the first system with a European Technical Assessment ETA for high loads through insulation. The ResiTHERM 12 and ResiTHERM 16 are designed for heavy loads, have an ETA and do not let water through in driving rain. The ResiTHERM 12 wood is intended for insulated timber structures, and the ResiTHERM 37 and the 37 starter set for hollow brick. For the 37, a wide AS washer to DIN 9021, an ABH drilling aid, a BST core bit and an AD adapter shank are supplied. The 12 and 16 versions are adjusted with a DIN 3116C two-pin key, and an A4 stainless steel adapter takes them to an M12/M10 threaded rod. Light elements on an insulated facade are fixed with separate products of the same group.
How to choose
The model is determined by the base material behind the insulation and the weight of the attached element. An awning, pergola or balcony railing on concrete or solid brick is hung on the ResiTHERM 12 or 16, hollow brick requires the ResiTHERM 37, and a timber frame the ResiTHERM 12 wood. When the load is not heavy, the universal ResiTHERM 8 is enough. If there is no insulation and the bracket goes straight into C20/25–C50/60 concrete, it is simpler to take the BTS B screw anchor or the BAZ wedge anchor.
Request a price and lead time
ResiTHERM insulation fixings and stand-off system for facades. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
How can an air conditioner or awning be fixed to an insulated facade without a cold bridge?
The ResiTHERM fixing passes through the insulation into the load-bearing wall, and the thermal separation module cuts off the cold bridge. For heavy elements the ResiTHERM 12 or 16 is used.
Into which base materials can ResiTHERM be anchored?
Into concrete, solid and hollow brick and masonry. For hollow brick there is the ResiTHERM 37 with the BST core bit and the ABH aid.
Which threaded rod can be connected to ResiTHERM 12 and 16?
The A4 stainless steel adapter is designed for an M12/M10 rod. The position is adjusted with a DIN 3116C two-pin key.
Where is the ResiTHERM system made?
It is made by a Spanish family group with more than 50 years of experience in fasteners, whose plants are in Spain, Germany, China, the USA and Mexico. The group's daily output reaches 14 million screws and 1 million plastic plugs, and the products go to more than 100 countries.
Similar products
TBE / TBE/D / MAL / RJATBE / TBE/D / MAL / RJA aluminium cable lugs and sleeves, 16–500 mm²
TBEM / TDC / TBF / MBITBEM / TDC / TBF / MBI bimetallic and tinned aluminium lugs and Al–Cu sleeves, 16–400 mm²
BRnylon cable ties and cable fixings
DIN 471 / 472 / 912 / 933 / 981 / 6885Slotted nuts, retaining rings, pins, keys, screws (DIN 471/472/912/933/981/6885, ISO 2338)REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.