HeatEngine modular premix system with a point burner head for natural gas and H2, 25–140 kW
Country: Germany · Model: HeatEngine
A modular system with full premixing of gas and air and a point burner head, 25–140 kW on natural gas and 25–70 kW on hydrogen. The turndown ratio is up to 1:10 and the process temperature up to 450 °C. It is used in drying and furnace installations of the food industry, in laundry equipment and in air heating chambers.
- NG power
- 25, 40, 65, 90, 140 kW
- H2 power
- 25, 40, 70 kW (burner with flame arrester)
- Burner diameter
- NG 40, 60, 70, 98, 130 mm; H2 40, 60, 98 mm
- Turndown range
- up to 1:10
Technical specifications
| NG power | 25, 40, 65, 90, 140 kW |
|---|---|
| H2 power | 25, 40, 70 kW (burner with flame arrester) |
| Burner diameter | NG 40, 60, 70, 98, 130 mm; H2 40, 60, 98 mm |
| Turndown range | up to 1:10 |
| Modules | M1 gas connection, M2 gas line (EN ISO 13577-2), M3 fan and mixer, M4 transition, M5 burner head, M6 burner control unit, M7 electrical installation |
| Power supply | 230 or 110 V AC |
| Gas inlet pressure | 30 mbar or 65 mbar (depending on version) |
| Process temperature | up to 450 °C |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The system is assembled from seven modules M1–M7 for a specific process and is supplied ready for connection. M1 includes the gas connection with a ball valve and a flexible hose of 0.5 or 1.0 m, and M2 is the gas line per EN ISO 13577-2 with a pressure gauge. M3 combines the fan and mixer at 230 or 110 V AC, with a power of 25, 40, 65, 90 or 140 kW for natural gas and 25, 40 or 70 kW for hydrogen. M4 provides the transition to the burner, straight (100 mm) or with a 90° turn, and a pressure switch. M5 is a point head with a diameter of 40, 60, 70, 98 or 130 mm, and for hydrogen 40, 60 or 98 mm with a flame arrester. M6 controls combustion in a metal or plastic housing at 230 or 110 V, and M7 is the electrical installation. The gas inlet pressure is 30 or 65 mbar depending on the version, and the ambient temperature is from −15 to +60 °C.
How to choose
The power is set by module M3 and the diameter of head M5. For natural gas there are five steps from 25 to 140 kW, for hydrogen three from 25 to 70 kW, and the hydrogen head has a flame arrester and runs on 100 % H2. If a power above 140 kW or a more flexible choice of fuel is needed, look at the CONEFIRE GB process burners of 125–4000 kW.
Request a price and lead time
HeatEngine modular premix system with a point burner head for natural gas and H2, 25–140 kW. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What powers are available for natural gas and hydrogen?
For natural gas 25, 40, 65, 90 or 140 kW, for hydrogen 25, 40 or 70 kW. The turndown ratio is up to 1:10.
Can the system run on 100 % hydrogen?
Yes, there is a hydrogen version with a 40, 60 or 98 mm head and a built-in flame arrester.
What are the supply voltage and gas inlet pressure?
The fan and burner control unit work from 230 or 110 V AC. The gas inlet pressure is 30 mbar or 65 mbar depending on the version.
What temperature does the system work up to?
The process temperature is up to 450 °C at an ambient temperature from −15 to +60 °C.
Similar products
Selectra M/MRSelectra electronic gas flame modulation systems: M/MR valves (3.4 kPa inlet), amplifiers, sensors, controllers
WGL30/1, WGL40/1WGL30–WGL40 compact dual-fuel gas/oil burners 70–550 kW
LasGAR Basic / LasGAR PlusLasGAR Basic / LasGAR Plus piezo proportional cutting gas pressure regulators for laser cutting machines, input up to 40 bar, output 0.1–30 bar
RV52–RV111RV52–RV111 (Straight-Thru-Flow) direct-acting gas pressure regulators Rp 1/2–Rp 3, inlet up to 20 kPaREQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.