Ukrainian Components WarehouseA USK project
UKRSKINDUSTRIAL COMPONENTS

LOW-VOLTAGE EQUIPMENT

REC4, RECB, RECmax, RGU-10 RAL, WRU-RA LV protection devices with automatic reclosing

Two- and four-pole RCCBs with a reclosing motor, motorized circuit breakers and RGU-10 RAL residual current relays for 0.03–30 A with an automatic reclosing function (ARF). After a false or short-term trip not related to insulation damage, the device restores the voltage by itself, and no crew is sent to the remote site.

REC4 / REC4-C
2P or 4P RCCB with a built-in reclosing motor; e.g. REC4-C-2P-40-300: 40 A, 300 mA, type A; time-based reclosing; status output
RECB
type B versions
RECmax MP
motorized circuit breakers (e.g. C4-16: 4P, 16 A, curve C), remote switch-off/switch-on via O/I inputs
RECmax CVM / LPD
circuit breakers with reclosing and measuring/protection functions

Technical specifications

REC4 / REC4-C2P or 4P RCCB with a built-in reclosing motor; e.g. REC4-C-2P-40-300: 40 A, 300 mA, type A; time-based reclosing; status output
RECBtype B versions
RECmax MPmotorized circuit breakers (e.g. C4-16: 4P, 16 A, curve C), remote switch-off/switch-on via O/I inputs
RECmax CVM / LPDcircuit breakers with reclosing and measuring/protection functions
RGU-10 RALresidual current relay 0.03–30 A with programmable reclosing, works with a contactor
WRU-RArelay with a built-in current transformer, programmable number of reclosing attempts
Power supply230 V~ ±20 %, 50/60 Hz, 4.5–6 VA

Specifications are taken from the manufacturer’s technical documentation. Updated .

Description

The device analyses the situation after a trip, and in case of a persistent fault, after the set number of attempts, it locks out and signals. REC4 and RECB combine an RCCB with an intelligent motor and are installed like an ordinary RCCB, without a separate connection between the motor and the breaker. Reclosing is time-based, a mode selector chooses manual control or ARF, and REC4-C reports through the status output that the attempts have been used up. For example, REC4-C-2P-40-300 has 2 poles, 40 A, 300 mA, type A, a 230 V~ ±20 % supply, 6 VA consumption and category CAT III 300 V. Motorized RECmax MP, such as MP-C4-16 (4 poles, 16 A, curve C), protect against short circuit and overload and are controlled remotely through the dry contact inputs O and I. The super-immunized relays RGU-10 RAL and WRU-RA of type A with a programmable reclosing cycle work together with a contactor or a motorized breaker; in WRU-RA the current transformer is built in.

How to choose

Start from the device that is installed in the panel. In place of an ordinary RCCB, install REC4 with type A or RECB with type B, and for electric vehicle charging station lines there are REC4-EV and RECB-EV. If short-circuit protection and remote commands are needed together with ARF, take RECmax MP, and measurement is added by RECmax CVM and RECmax LPD. Where the line is already switched by a contactor, an RGU-10 RAL or WRU-RA relay is enough, and the same RECmax MP can serve as the actuating device for them.

Request a price and lead time

REC4, RECB, RECmax, RGU-10 RAL, WRU-RA LV protection devices with automatic reclosing. We reply within one business day.

* — required fields

Or email office@usk.ua or call +38 (044) 339-50-20.

FAQ

How does an RCCB with ARF differ from an ordinary RCCB?

The built-in motor of REC4 recloses the RCCB without staff involvement, and in case of a persistent fault, after the set number of attempts, the device locks out and does not switch the line on again.

What power supply do REC4-C and RECmax MP need?

REC4-C is powered from 230 V~ ±20 % and consumes 6 VA, RECmax MP works from 230 V~ ±30 % at 4.5 VA, and the mains frequency is 50/60 Hz.

How is the RECmax MP motorized breaker controlled remotely?

A command to input O switches the breaker off, to input I switches it on again, and two outputs transmit the status and the cause of the trip (switch-off, manual control or test).

Where is it advisable to install automatic reclosing devices?

On outdoor lighting, ATMs, traffic lights, alarm systems, garage doors, cold rooms and refrigerators, air conditioning, UPS, telecommunication and pumping units and critical production processes.

Similar products

Low-voltage equipment

REQUEST

Need a price, lead time or replacement?

Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.

How we use your data

UKRSK, Ukrainian Components Warehouse, is a USK project. This form saves your email, request details, optional name and company, and attached files on the UKRSK server to process your enquiry. Files are not published in the catalogue. The form currently does not perform automated technical matching or send commercial quotations. To enquire about or delete your data, submit a request using this form and include your reference number. Do not attach passwords, payment details or unrelated confidential materials. Technical rate-limit records are stored separately; no advertising trackers are used.

To monitor page performance we collect LCP, INP and CLS measurements, language, screen category and a random measurement ID. These are stored on our hosting for up to 35 days; form contents, email, IP address and full URL are not recorded in this log. No cookies are used; Do Not Track and Global Privacy Control disable measurement.