INSTAL-BLOK — modular low-voltage switchgear cabinets up to 1600 A
Country: Poland · Model: INSTAL-BLOK
INSTAL-BLOK consists of modular cabinets for low-voltage switchgear assemblies with busbars of 250–1600 A and a protection rating from IP20 to IP66. These cabinets are used to build industrial and public distribution boards, automation and metering boards, including for food production.
- Busbars
- 250–1600 A
- Ingress protection
- IP20–IP66
- Impact resistance
- IK10
- Enclosure
- 1.5 mm steel, stainless steel optional
Technical specifications
| Busbars | 250–1600 A |
|---|---|
| Ingress protection | IP20–IP66 |
| Impact resistance | IK10 |
| Enclosure | 1.5 mm steel, stainless steel optional |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The frame system is built from separate sections, so a board of the required width and number of sections is assembled without custom enclosure design. The enclosure is made of 1.5 mm thick steel, and to order it is made of stainless steel, which matters for wash-down areas in the food industry. The IP20–IP66 range allows the same series to be used both in an electrical room and in a workshop with water and dust. IK10 impact resistance protects doors and panels from mechanical damage in production areas. The busbar rating of 250–1600 A covers both small automation boards and distribution points of medium-sized industrial sites.
How to choose
The selection starts with the busbar current and the room conditions. For a dry electrical room a lower IP rating and painted steel are enough, while wash-down areas need a high IP rating up to IP66 and a stainless steel enclosure. If the busbars must carry more than 1600 A, switch to the ZR-W rated 1000–6300 A, or to the RN-W rated 1250–2000 A when the board is installed in a substation.
Request a price and lead time
INSTAL-BLOK — modular low-voltage switchgear cabinets up to 1600 A. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What busbar current are the INSTAL-BLOK cabinets rated for?
The busbars are made for a current from 250 to 1600 A.
What protection rating do the INSTAL-BLOK cabinets have?
Depending on the version, from IP20 to IP66, and the enclosure impact resistance is IK10.
What metal is the INSTAL-BLOK enclosure made of?
Steel 1.5 mm thick, optionally stainless steel.
Can an electricity metering board be built on the basis of INSTAL-BLOK?
Yes, the series is intended for metering and automation boards, as well as for distribution boards with busbar current up to 1600 A.
Is INSTAL-BLOK suitable for the food industry?
Yes, for such sites a stainless steel enclosure and a high protection rating up to IP66 are chosen.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.