REVO C 1PH — single-phase thyristor power controller, 30–2100 A, up to 1000 V
Country: Italy · Model: REVO C 1PH
The REVO C 1PH single-phase thyristor power controller is rated 30–800 A as standard and 1100–2100 A in the Extended version, for 480, 600, 690 or 1000 V ±10 % supplies. It goes into control cabinets of electric furnaces, dryers and IR heaters with single-phase loads.
- Phases
- 1 phase
- Rated current
- 30–800 A (standard), 1100–2100 A (Extended)
- Voltage
- 480, 600, 690, 1000 V ±10 %
- Load
- resistive, inductive (transformer primary), short-wave IR lamps, MoSi2, SiC
Technical specifications
| Phases | 1 phase |
|---|---|
| Rated current | 30–800 A (standard), 1100–2100 A (Extended) |
| Voltage | 480, 600, 690, 1000 V ±10 % |
| Load | resistive, inductive (transformer primary), short-wave IR lamps, MoSi2, SiC |
| Inputs | 0–20 mA, 4–20 mA, 0–10 V, SSR, Modbus as standard; fieldbuses by order code |
| Firing modes | half cycle, single cycle, burst, delayed triggering (DT), phase angle with and without soft start |
| Control | U, I, P or U², I² with changeover to U×I |
| Setup | USB, unit powered from USB during setup (no load or auxiliary supply) |
| Short-circuit rating (SCCR) | 100 kA up to 600 V |
| Fuses | built-in (option), cooled by fan airflow |
| Approvals | CE + EMC; cUL 30–700 A, UL 800–2100 A |
| Compatibility | dimensions and connections match REVO M and REVO CL (discontinued) |
| Software | Siemens TIA Portal libraries |
Replacement for
ROT-63, ROT-160, ROT-250E (including 700 V version), ROT-630, ROT-630M, ROT-800E, ROT-1400E (REVO C 1PH, 30–2100 A, 480/600/690/1000 V)
selected by purpose and main parameters, please confirm with the manager
Replacement pages: РОТ-63, РОТ-160, РОТ-250Е, РОТ-630, РОТ-630М, РОТ-800Е, РОТ-1400Е
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
One microprocessor unit is set up in software for load type and firing mode. It drives resistance heaters, transformer primaries, short-wave IR lamps and MoSi2 and SiC elements, whose resistance changes a lot with temperature and ageing. Firing modes are half cycle, single cycle, burst, delayed triggering DT for transformers and phase angle with or without soft start. Control is by voltage, current, power, or U² or I² with changeover to U×I. The setpoint is 0–20 mA, 4–20 mA, 0–10 V, SSR logic or Modbus, and other fieldbuses come by order code. The short-circuit rating is 100 kA up to 600 V, and optional semiconductor fuses sit inside the housing in the fan airflow, saving cabinet space. Libraries exist for Siemens TIA Portal, and approvals are CE, cUL for 30–700 A and UL for 800–2100 A.
How to choose
Pick the model by load current, supply voltage and heater type. REVO C 1PH replaces the discontinued REVO M 1PH, REVO CL and MULTIDRIVE 1PH without rewiring, as dimensions and connections match. It also replaces single-phase ROT-63…ROT-1400E regulators, and the 690–1000 V version goes in place of 700 V ROT units. A three-phase furnace needs REVO C 2PH / 3PH with the same 30–2100 A, and if 480 or 600 V and up to 280 A will do, REVEX 1PH costs less.
Request a price and lead time
REVO C 1PH — single-phase thyristor power controller, 30–2100 A, up to 1000 V. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What can replace a ROT-1400E or another single-phase ROT regulator?
REVO C 1PH replaces ROT-63…ROT-1400E units (Soviet-era single-phase thyristor voltage regulators), and its 690–1000 V version replaces 700 V ROT units. Our manager confirms the final choice by load current, voltage and heater type.
Can REVO C 1PH be configured without mains power?
Yes, during USB setup the unit is powered from the port itself. Neither power nor auxiliary voltage is needed.
What is the maximum current of the REVO C 1PH controller?
The standard range ends at 800 A, and the Extended version covers 1100–2100 A.
Is REVO C 1PH suitable for MoSi2 and SiC heaters?
Yes, molybdenum disilicide and silicon carbide heaters are listed loads. For them the controller offers U² or I² control with changeover to U×I.
Similar products
Thyro-SDigital thyristor switch, 1/2/3 phases, 8–350 A, 230–500 VThyro-ADigital thyristor power controller, 1/2/3 phases, 8–1500 A, 230–500 VEPowerModular thyristor power controller 50–630 A (up to 4000 A in remote version), up to 690 VEPackCompact thyristor power controller, 1/2/3 phase, up to 125 A, up to 500 VREQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.