Three-phase inverter voltage stabilizer Volter Smart-100 (105 kW)
Country: Ukraine · Model: Smart-100
Smart-100 is a three-phase inverter stabilizer rated 105 kW and 160 A per phase, intended for large workshops, pumping stations, warehouses and shopping complexes. The 3×220 V output holds ±0.5 % accuracy with a response time of about 1 ms.
- Model
- Smart-100 — 105 kW, 160 A per phase
- Input range
- 130–300 V per phase
- Regulation accuracy
- ±0.5 %
- Dimensions (H×W×D)
- 1790×1040×155 mm
Technical specifications
| Model | Smart-100 — 105 kW, 160 A per phase |
|---|---|
| Input range | 130–300 V per phase |
| Regulation accuracy | ±0.5 % |
| Dimensions (H×W×D) | 1790×1040×155 mm |
| Weight | 117 kg |
| Cooling | forced |
| Mounting | wall-mounted |
| Type | inverter-based (stepless regulation) |
| Efficiency | 98 % |
| Response time | 1 ms |
| Output voltage | 220 V per phase |
| Cut-off in transit mode | 260 ± 5 V |
| Start-up delay | 4.5–7.5 s |
| Noise level | 34–40 dB depending on load |
| Ingress protection | IP20 |
| Operating conditions | +1…+40 °C indoors, humidity 40–80 % |
Analogues in the catalogue
- AVR — single-phase static stabilizer 20–400 A (up to 96 kVA)
- AVR-L (AVR3LS) — three-phase stabilizer 70–140 kVA with digital meters
- SVR Series solid-state voltage stabilizer 5–400 kVA
- TSO industrial voltage stabilizer in an enclosure up to IP65, from 5 kVA
- Infinity+ — thyristor voltage stabiliser up to 3200 kVA
- Infinity — precision solid-state voltage stabiliser up to 260 kVA
- Aquarius three-phase static voltage stabilizer 10–120 kVA
- SVS-3P — three-phase servo-electronic voltage stabiliser 6–600 kVA
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The double-conversion circuit works without energy storage, and each phase is regulated independently. The input range is 130–300 V per phase and efficiency is 98 %. The housing measures 1790×1040×155 mm, weighs 117 kg and mounts on a wall, with forced cooling. Protection covers overload, short circuit, overheating and overvoltage. The transit cut-off occurs at 260 ± 5 V and the start-up delay is 4.5–7.5 s. The noise level of 34–40 dB depends on load and ingress protection is IP20, so the unit goes indoors at +1…+40 °C and 40–80 % humidity. This power class is needed where a smaller modular unit is no longer enough and stepped regulation is not accurate enough.
How to choose
There is a single model, so the choice comes down to load current rather than frame size. For less power, take the Smart range from Smart-12 to Smart-81, whose top model is rated 125 A. For larger loads the catalogue lists European static stabilizers of 100–2000 kVA and models of 70–140 kVA. Supplied as the official representative in Ukraine.
Request a price and lead time
Three-phase inverter voltage stabilizer Volter Smart-100 (105 kW), Volter. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What power and current is Smart-100 rated for?
Smart-100 is rated 105 kW and 160 A per phase, with 220 V per phase at the output.
What input voltage range does Smart-100 accept?
The input range is 130–300 V per phase, with ±0.5 % regulation accuracy. Response time is about 1 ms.
How much does Smart-100 weigh and what are its dimensions?
It weighs 117 kg and measures 1790×1040×155 mm (H×W×D). Mounting is on the wall and cooling is forced.
Does Smart-100 have overvoltage protection?
Yes, it is protected against overload, short circuit, overheating and overvoltage. It can also be installed at sites with a generator or a solar plant.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.