EasySolar-II GX — inverter/charger + MPPT + GX all-in-one
Country: Netherlands · Model: EasySolar-II GX
The EasySolar-II GX puts an inverter/charger, a solar charge controller and a GX system controller in one enclosure. The 3 kVA model comes with an MPPT 250/70, the 5 kVA model with an MPPT 250/100. The result is an all-in-one hybrid inverter for a solar system with a battery in a house or a small site.
- Models
- 3 kVA with MPPT 250/70, 5 kVA with MPPT 250/100; 4k5–6k5 GX
- Composition
- MultiPlus-II + SmartSolar MPPT + GX controller with display
- Communication
- Wi-Fi, BMS-CAN, Ethernet
Technical specifications
| Models | 3 kVA with MPPT 250/70, 5 kVA with MPPT 250/100; 4k5–6k5 GX |
|---|---|
| Composition | MultiPlus-II + SmartSolar MPPT + GX controller with display |
| Communication | Wi-Fi, BMS-CAN, Ethernet |
| Customs codes (for reference) | |
| HS code | 8504.40 |
| UKTZED code (Ukraine) | 8504408400 (≤7.5 kVA); 8504408800 (>7.5 kVA) |
| CN code (EU) | 85044084 |
Specifications are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
Inside are a MultiPlus-II, a SmartSolar MPPT and a GX controller with display, with power and signal wiring between them done at the factory. The installer only brings in the battery, the panels, the grid feed and the load output. In the MPPT name the first figure is the maximum PV voltage in volts and the second the battery charge current in amps. Strings are therefore sized so that open-circuit voltage in frost stays below 250 V. A lithium battery connects over BMS-CAN, and the GX controller runs charging from its BMS data. The internet link runs over Wi-Fi or Ethernet and carries remote monitoring. There are also 4k5–6k5 GX versions. The range once included an EasySolar model rated 1,600 VA.
How to choose
The model comes down to two figures, inverter power and MPPT current. The 3 kVA version with an MPPT 250/70 covers a house with moderate load and a small array, while the 5 kVA version with an MPPT 250/100 takes a bigger load and more modules. If a PV controller is already in place or more power is needed, a standalone MultiPlus-II at 3–15 kVA makes more sense. For long high-voltage strings the Multi RS Solar 48/6000 fits, with 2 trackers up to 450 V and a 6 kWp PV input.
Request a price and lead time
EasySolar-II GX — inverter/charger + MPPT + GX all-in-one. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
Which MPPT is in the EasySolar-II GX 5 kVA?
A SmartSolar MPPT 250/100, while the 3 kVA version uses an MPPT 250/70.
How does the EasySolar-II GX connect to a lithium battery?
Over BMS-CAN through the built-in GX controller, which steers charging from the battery BMS data.
What is inside the EasySolar-II GX?
A MultiPlus-II, a SmartSolar MPPT and a GX controller with display, prewired in one enclosure.
What do the figures 250/100 mean on the EasySolar-II GX MPPT?
250 is the maximum PV voltage in volts and 100 the battery charge current in amps.
Can the EasySolar-II GX be monitored remotely?
Yes, the built-in GX goes online over Wi-Fi or Ethernet.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.