PS — sine wave inverter 12/24/48 V, 250–2800 W
Country: Netherlands · Model: PS
The PS sine wave inverter turns 12, 24 or 48 V battery DC into 230 V ±2%, 50 Hz at 250–2,800 W. At start-up it holds up to 6,500 W for 3 s, so it can start pumps, compressors and power tools whose inrush current is several times their running current. It goes into off-grid systems, vehicles and sites where mains is absent or keeps dropping out.
- Rated power
- 250–2800 W
- Peak power
- up to 6500 W (3 s)
- Input
- 12, 24 or 48 V
- Output
- 230 V ±2%, 50 Hz, THD < 5%
Technical specifications
| Rated power | 250–2800 W |
|---|---|
| Peak power | up to 6500 W (3 s) |
| Input | 12, 24 or 48 V |
| Output | 230 V ±2%, 50 Hz, THD < 5% |
| Max. efficiency | 92% (PS 1000-12) |
| Protection | high/low battery voltage, overtemperature, overload, short circuit |
| Customs codes (for reference) | |
| HS code | 8504.40 |
| UKTZED code (Ukraine) | 8504408400 (≤7.5 kVA) |
| CN code (EU) | 85044087 |
Specifications are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
The PS is a professional-class series with many power ratings. Output distortion is THD < 5%, which is clean enough for electronics, motors and lighting. The best efficiency in the line, 92%, belongs to the PS 1000-12, and other ratings run a little lower. A remote control switches it on and off, so the unit can sit next to the battery on short heavy DC cables. Protection trips on high or low battery voltage, overtemperature, overload and short circuit. The low-voltage cutoff prevents deep discharge, and the high-voltage cutoff guards the inverter if a charger fails.
How to choose
Start with the battery voltage. For loads from 1,000 W up, a 24 or 48 V input cuts cable current to a half or a quarter of the 12 V figure, so wire size and losses drop. Size the rating by the total continuous load and let the 6,500 W peak cover start-up surges. If you also need mains charging with automatic transfer, the PSC inverter/charger covers 1,300–2,800 W with 35–120 A charge current. For 12/24 V systems up to 3,000 W with THD < 3% there is the SWI, and for small loads on a 24 V vehicle system the PST-E at 250–1,000 W.
Request a price and lead time
PS — sine wave inverter 12/24/48 V, 250–2800 W. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What peak power can a PS inverter handle?
Up to 6,500 W for 3 s, with series ratings of 250–2,800 W. That margin covers the start of motors and compressors.
What battery voltage do PS inverters need?
Versions exist for 12, 24 and 48 V input to match the battery bank.
How efficient are PS inverters?
Maximum efficiency is 92%, reached by the PS 1000-12.
Can a PS run from a 48 V solar battery bank?
Yes, 48 V input models deliver 230 V ±2%, 50 Hz with THD < 5% for household and office loads.
Does the inverter shut down when the battery runs low?
Yes, low battery voltage protection cuts the output. The same protection also reacts to high battery voltage, overtemperature, overload and short circuit.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.