INGECON SUN STORAGE 100TL — three-phase battery inverter 100 kW
Country: Spain · Model: INGECON SUN STORAGE 100TL
A three-phase 100 kW battery inverter for a 400 V grid that works with 570–850 V batteries. It is installed in commercial and industrial storage systems where the battery is connected to the AC grid.
- Power
- 100 kW
- Max. DC voltage
- 1100 V
- Battery voltage range
- 570–850 V
- Nominal grid voltage
- 400 V
Technical specifications
| Power | 100 kW |
|---|---|
| Max. DC voltage | 1100 V |
| Battery voltage range | 570–850 V |
| Nominal grid voltage | 400 V |
| Ingress protection | IP65 / NEMA 4 |
| Weight | 80 kg |
| Communication | Ethernet, Wi-Fi, built-in EMS |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The circuit is transformerless and bidirectional, so the same unit charges the battery from the grid or from the solar plant and discharges it to the load. The string architecture means that a faulty block is removed and replaced as a whole, and this does not require a team of qualified specialists. The weight of 80 kg allows two installers to perform the replacement without a crane. The IP65 / NEMA 4 enclosure withstands outdoor installation next to battery cabinets. The upper DC voltage limit is 1100 V. For communication there are Ethernet and Wi-Fi, and the built-in EMS manages charging and discharging without an external controller.
How to choose
The battery bank voltage is checked first; it must lie within 570–850 V. Higher power is built up from several such blocks, and the failure of one of them does not stop the whole system. For a private house with a three-phase supply, the 3Play 10TL M hybrid of 10 kW with a 250–600 V battery is more appropriate.
Request a price and lead time
INGECON SUN STORAGE 100TL — three-phase battery inverter 100 kW. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What battery voltage does the INGECON SUN STORAGE 100TL support?
The battery range is 570–850 V, and the maximum DC voltage is 1100 V.
Can the STORAGE 100TL charge the battery from the grid?
Yes, the inverter is bidirectional and works in charge and discharge modes on a 400 V grid.
Is a separate EMS controller needed for the STORAGE 100TL?
No, the EMS is built in, and communication with the monitoring system goes through Ethernet or Wi-Fi.
How much does the STORAGE 100TL battery inverter weigh?
The weight is 80 kg, so the block is replaced without lifting equipment.
What ingress protection rating does the STORAGE 100TL have?
IP65 under the European classification and NEMA 4 under the American one; outdoor installation is permitted.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.