X1-Hybrid G4 — single-phase hybrid inverter, 3–7.5 kW
Country: China · Model: X1-Hybrid G4
The single-phase hybrid inverter X1-Hybrid G4 is available in ratings from 3.0 to 7.5 kW and works with a high-voltage battery. It is installed in private houses where solar panels, storage and EPS backup power must come together in one unit.
- Power
- 3.0 / 3.7 / 5.0 / 6.0 / 7.5 kW
- MPPT
- 2, 16 A
- MPPT range
- 70–550 V
- EPS peak power
- 11.25 kVA, 10 s
Technical specifications
| Power | 3.0 / 3.7 / 5.0 / 6.0 / 7.5 kW |
|---|---|
| MPPT | 2, 16 A |
| MPPT range | 70–550 V |
| EPS peak power | 11.25 kVA, 10 s |
| Ingress protection | IP65 |
| Weight | 25 kg |
| Customs codes (for reference) | |
| HS code | 8504.40 |
| UKTZED code (Ukraine) | 8504408400 (≤7.5 kVA); 8504408800 (>7.5 kVA) |
| CN code (EU) | 85044084 |
Specifications are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
The line has five ratings — 3.0, 3.7, 5.0, 6.0 and 7.5 kW — so the inverter is chosen to match the power of the single-phase supply. The input has two MPPT trackers with 16 A per tracker, and the 70–550 V operating range also accepts short strings on small roofs. In EPS mode the inverter delivers a peak of 11.25 kVA for 10 s, which is enough to start a pump or a refrigerator compressor. The battery is high-voltage, so DC-side currents are lower and cables are thinner than in low-voltage systems of the same power. Together with the T-BAT H 3.0 battery and the Matebox unit, the inverter forms a ready-made X-ESS G4 system. The IP65 housing, weighing 25 kg, is wall-mounted in a garage, under a canopy or on a facade.
How to choose
The rating is chosen by the peak load of the house and the power of the PV array, split between two trackers. This model does not suit a three-phase supply; for that, take the X3-HYBRID G4 rated 5–15 kW with an MPPT range of 180–950 V and parallel operation up to 150 kW. If no battery is needed and the case is a few panels on a balcony, it is simpler to install X1-Micro microinverters rated 750–2400 W.
Request a price and lead time
X1-Hybrid G4 — single-phase hybrid inverter, 3–7.5 kW. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
Which battery is connected to the X1-Hybrid G4?
The inverter is designed for high-voltage batteries. In the X-ESS G4 system it works with the T-BAT H 3.0 battery and the Matebox unit.
What is the MPPT voltage range of the X1-Hybrid G4?
The two trackers operate in the 70–550 V range, with up to 16 A each. Strings from two roof slopes are connected to separate inputs.
Does the X1-Hybrid G4 handle starting currents in EPS mode?
EPS peak power is 11.25 kVA for 10 s. This margin is enough to start a motor, while the continuous load is limited by the rating of the chosen model.
Where can the X1-Hybrid G4 inverter be installed?
The IP65 protection rating allows installation outdoors under a canopy or in an unheated room. At 25 kg, the inverter is hung on the wall without lifting equipment.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.