Powersine PS1000–PS1800 — pure sine wave inverter 0.85–1.4 kW
Country: Netherlands · Model: Powersine PS1000–PS1800
The Powersine PS1000–PS1800 series sits in the middle of the range, delivering 850–1400 W continuously and up to 3000 W at peak from a 12, 24 or 48 V battery. These inverters are fitted in motorhomes, boats, service vehicles and off-grid solar systems to run kitchen appliances and power tools from the battery.
- Rated power
- 850–1400 W (10 min: 1050–1800 W)
- Peak power
- 2000–3000 W
- Input
- 12, 24 or 48 V DC
- Output
- 230 V ±2 %, 50/60 Hz, THD < 5 %
Technical specifications
| Rated power | 850–1400 W (10 min: 1050–1800 W) |
|---|---|
| Peak power | 2000–3000 W |
| Input | 12, 24 or 48 V DC |
| Output | 230 V ±2 %, 50/60 Hz, THD < 5 % |
| Max. efficiency | 92–94 % |
| Communication | TBSLink |
| Customs codes (for reference) | |
| HS code | 8504.40 |
| UKTZED code (Ukraine) | 8504408400 (≤7.5 kVA) |
| CN code (EU) | 85044087 |
Specifications are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
The output is a 230 V sine wave with ±2 % deviation and harmonic distortion below 5 %, at 50 or 60 Hz. The ten-minute rating of 1050–1800 W covers short cycles of powerful loads, and the 2000–3000 W peaks handle the starting current of a compressor or motor. Maximum efficiency is 92–94 %, so at rated load only a small share of the battery energy is lost as heat. The battery voltage determines the input current and cable cross-section, since at 12 V and 1400 W the inverter draws more than a hundred amperes from the battery. The TBSLink interface is intended for data exchange with other devices of the manufacturer in a shared onboard system.
How to choose
Within the series, choose the model by the continuous power of 850–1400 W and the battery voltage. For a 48 V solar power system it makes sense to take the 48 V version, because the currents are four times lower than at 12 V. When the load does not exceed 600 W, the compact PS300–PS800 is more suitable, and for 1800–2800 W there is the PS2000–PS3500. If you also need mains charging with automatic changeover, look at the Powersine Combi PSC1600/1800 rated 1300–1400 W.
Request a price and lead time
Powersine PS1000–PS1800 — pure sine wave inverter 0.85–1.4 kW. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What peak power can the Powersine PS1000–PS1800 handle?
The peak load is 2000–3000 W depending on the model, and for 10 min the inverter holds 1050–1800 W. This margin is enough to start a compressor or a tool with a high starting current.
Is the PS1000–PS1800 suitable for a 48 V solar system?
Yes, the series includes a version with a 48 V DC input alongside 12 and 24 V. This is convenient for an off-grid solar system, because the input current is four times lower than in the 12 V version.
What is the output frequency of the PS1000–PS1800 inverter?
The inverter outputs 230 V ±2 % at 50 or 60 Hz with THD < 5 %, so it suits equipment built for both the European and the 60 Hz mains.
What is the efficiency of the Powersine PS1000–PS1800?
Maximum efficiency is 92–94 %. The remaining energy turns into heat, so free space for air must be left around the case.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.