Powersine PS2000–PS3500 — pure sine wave inverter 1.8–2.8 kW
Country: Netherlands · Model: Powersine PS2000–PS3500
The most powerful Powersine pure sine wave series, PS2000–PS3500, delivers 1800–2800 W continuously and withstands peaks of 4000–6500 W from a 12, 24 or 48 V battery. It is chosen for heavy loads in mobile, marine and off-grid systems, where a water heater, an air conditioner or a powerful tool runs from the battery.
- Rated power
- 1800–2800 W (10 min: 2100–3800 W)
- Peak power
- 4000–6500 W
- Input
- 12, 24 or 48 V DC
- Output
- 230 V ±2 %, 50/60 Hz, THD < 5 %
Technical specifications
| Rated power | 1800–2800 W (10 min: 2100–3800 W) |
|---|---|
| Peak power | 4000–6500 W |
| Input | 12, 24 or 48 V DC |
| Output | 230 V ±2 %, 50/60 Hz, THD < 5 % |
| Max. efficiency | 92–93 % |
| Protection | short circuit, overload, overheating, AC back-feed, ripple |
| Customs codes (for reference) | |
| HS code | 8504.40 |
| UKTZED code (Ukraine) | 8504408400 (≤7.5 kVA) |
| CN code (EU) | 85044087 |
Specifications are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
The output is a 230 V ±2 % sine wave at 50 or 60 Hz with harmonic distortion below 5 %. For 10 min the inverter holds 2100–3800 W, so a short kettle or induction hob cycle does not cause a shutdown. The 4000–6500 W peak is meant for the starting currents of induction motors in pumps and compressors. The circuit protects against short circuit, overload, overheating, AC back-feed to the output and excessive ripple on the input. Ripple protection is needed on vehicles where the same battery is charged by the alternator and chargers at the same time. Maximum efficiency is 92–93 %.
How to choose
Start with the battery voltage, because at a continuous 2800 W from 12 V the current exceeds two hundred amperes, and for this series the 24 or 48 V version is more sensible. Choose the power by the sum of loads switched on at the same time, within 1800–2800 W. If you do not need that much, the PS1000–PS1800 rated 850–1400 W will be more compact. When the inverter must also charge the battery from the mains or a generator and switch the load, choose the Powersine Combi PSC2000–PSC3500 with the same power and a charging current of 50–120 A.
Request a price and lead time
Powersine PS2000–PS3500 — pure sine wave inverter 1.8–2.8 kW. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What protections does the Powersine PS2000–PS3500 inverter have?
The inverter is protected against short circuit, overload, overheating, AC back-feed and ripple on the 12, 24 or 48 V input. Back-feed protection matters when the inverter output and the shore power inlet are switched onto the same bus.
How much can the PS3500 deliver for a short time?
For 10 min the largest model holds up to 3800 W, and the peak value reaches 6500 W. The continuous power of the PS3500 is 2800 W.
Will the PS2000–PS3500 start a pump or a compressor?
The peak of 4000–6500 W is designed precisely for motor starting currents. After starting, the running power must fit within the 1800–2800 W of the chosen model.
Which battery voltage should I choose for a 2.8 kW inverter?
The series is available for 12, 24 and 48 V DC. For 2.8 kW, 24 or 48 V is more practical, because the input current is two or four times lower than at 12 V and the cables are thinner.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.