Powersine PS300–PS800 — pure sine wave inverter 250–600 W
Country: Netherlands · Model: Powersine PS300–PS800
The compact Powersine PS300–PS800 pure sine wave inverters convert 12, 24 or 48 V onboard battery voltage to 230 V AC at a continuous load of 250–600 W. They are installed in motorhomes, boats and service vans to run a TV, audio system, power tools and chargers.
- Rated power
- 250–600 W (10 min: 330–800 W)
- Peak power
- 700–1250 W
- Input
- 12, 24 or 48 V DC
- Output
- 230 V ±2 %, 50 Hz (optional 115 V / 60 Hz), THD < 5 %
Technical specifications
| Rated power | 250–600 W (10 min: 330–800 W) |
|---|---|
| Peak power | 700–1250 W |
| Input | 12, 24 or 48 V DC |
| Output | 230 V ±2 %, 50 Hz (optional 115 V / 60 Hz), THD < 5 % |
| Max. efficiency | 91–95 % |
| Operating temperature | −20…+50 °C |
| Compliance | CE, E-mark |
| Customs codes (for reference) | |
| HS code | 8504.40 |
| UKTZED code (Ukraine) | 8504408400 (≤7.5 kVA) |
| CN code (EU) | 85044087 |
Specifications are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
The output voltage is held within ±2 % and THD is below 5 %, so switching power supplies, tool motors and audio equipment run the same as from the mains. The standard frequency is 50 Hz, and a 115 V / 60 Hz version is optionally available for equipment built for the American mains. For 10 min the inverter delivers 330–800 W, and the short peak of 700–1250 W covers the starting current of a drill or a car fridge compressor. The automatic standby function puts the inverter into stand-by mode when there is no load and cuts no-load consumption by 70 %, which noticeably extends the runtime of a small service battery. Maximum efficiency is 91–95 % depending on the model. The operating range of −20…+50 °C suits an unheated compartment, and the CE and E-mark markings are required for installation on road vehicles.
How to choose
The model sets the continuous load. The smallest PS300 is rated for 250 W and the largest PS800 for 600 W, and the 12, 24 or 48 V input voltage is ordered to match your battery. For 850–1400 W and the TBSLink interface, move up to the PS1000–PS1800 series, and for 1800–2800 W to PS2000–PS3500. If the inverter must also charge the battery from shore power, the Powersine Combi PSC1600/1800 is more suitable.
Request a price and lead time
Powersine PS300–PS800 — pure sine wave inverter 250–600 W. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
Can the Powersine PS800 run a kettle or a microwave oven?
The continuous power of the largest model is 600 W, up to 800 W for 10 min. A kettle and most microwave ovens draw more, so for them choose PS1000–PS1800 or PS2000–PS3500.
How much power does the PS300–PS800 inverter use with no load?
The automatic standby mode cuts no-load consumption by 70 %. An inverter left switched on while parked drains the battery much more slowly than it would without this function.
Can the PS300–PS800 be installed in an unheated motorhome in winter?
Yes, the operating range is −20…+50 °C. In harder frost it is better to place the inverter in an insulated compartment.
Which battery voltage does the Powersine PS300–PS800 support?
Versions for 12, 24 and 48 V DC are available. The input voltage is chosen to match the specific battery when ordering.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.