PST-E 24 V — sine wave inverter 250–1000 W
Country: Netherlands · Model: PST-E 24 V
PST-E compact sine wave inverters are built for 24 V vehicle systems and deliver 250–1,000 W continuous, with up to 2× rated at peak. Output is 230 V ±3%, 50 Hz, THD < 3%. They go into truck cabs, service vehicles and boats where a 24 V battery runs laptops, tool chargers and small appliances.
- Continuous power
- 250–1000 W
- Peak power
- 2× rated
- Input
- 24 V (20/21.4–33 V)
- Output
- 230 V ±3%, 50 Hz, THD < 3%
Technical specifications
| Continuous power | 250–1000 W |
|---|---|
| Peak power | 2× rated |
| Input | 24 V (20/21.4–33 V) |
| Output | 230 V ±3%, 50 Hz, THD < 3% |
| Efficiency | 85–88% |
| Protection | overload, low/high input voltage; the 1000 W model (PST-100S-24E) has a built-in GFCI |
| Customs codes (for reference) | |
| HS code | 8504.40 |
| UKTZED code (Ukraine) | 8504408400 (≤7.5 kVA) |
| CN code (EU) | 85044087 |
Specifications are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
The inverter runs from a 24 V vehicle system or battery and outputs 230 V AC with a sine waveform. Allowed input voltage is 20/21.4–33 V, and the upper limit comfortably covers system voltage with the alternator running. Efficiency is 85–88%. Protection trips on overload and on low or high input voltage, and the low-voltage cutoff leaves enough charge in a starter battery to crank the engine. The top 1000 W model, PST-100S-24E, has a built-in GFCI that opens the output on leakage to the chassis or ground. Each model can deliver twice its rated power at peak.
How to choose
This series is for 24 V systems only, and no model goes above 1,000 W. If people work next to the load outdoors or on deck, choose the PST-100S-24E with GFCI. For loads above 1,000 W on the same 24 V battery, the PSI at 1,000–3,000 W or the PS up to 2,800 W fits. For 12 V vehicles the comparable line is the SWI at 250–3,000 W with a 10–16.5 V input.
Request a price and lead time
PST-E 24 V — sine wave inverter 250–1000 W. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What input range does the PST-E 24 V accept?
It runs on 20/21.4–33 V input.
How efficient is the PST-E?
Efficiency is 85–88%.
Does the PST-E have ground fault protection?
Yes, the 1000 W model PST-100S-24E has a built-in GFCI.
Can a PST-E run on a 12 V truck system?
No, the input is for 24 V only. For a 12 V system use the SWI or PSI.
What surge can the PST-E handle?
Peak power is 2× rated, so the 1000 W model has a double margin at switch-on.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.