EQUINOX2 S/SX — single-phase grid-tied solar inverters 2–10 kW
Country: Spain · Model: EQUINOX2 S/SX
The single-phase grid-tied inverters EQUINOX2 S/SX are made for 2, 3, 4, 5, 6, 8 and 10 kW. They connect the photovoltaic installations of houses and commercial buildings to a single-phase network.
- Power
- 2, 3, 4, 5, 6, 8, 10 kW
- Technology
- SiC
- Case
- cast aluminum with epoxy coating, indoor and outdoor installation
- Monitoring
- WiFi, LAN, EQUINOX portal and app
Technical specifications
| Power | 2, 3, 4, 5, 6, 8, 10 kW |
|---|---|
| Technology | SiC |
| Case | cast aluminum with epoxy coating, indoor and outdoor installation |
| Monitoring | WiFi, LAN, EQUINOX portal and app |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The power section on silicon carbide SiC switches with lower losses than silicon switches, so the inverter heats less at full power. The case is cast from aluminum with an epoxy coating and is mounted both indoors and on an outer wall. Communication with the EQUINOX portal and app goes through WiFi or LAN, the owner sees the generation, and the installer diagnoses errors remotely. Wired LAN is appropriate where the router is far away or walls block the WiFi signal. The inverter works only with the grid, without a battery, so when power is lost the solar plant stops.
How to choose
The rating is selected for the power of the panel array and the contracted connection power. The range from 2 to 10 kW covers the typical single-phase inputs of private houses. If the site has a three-phase input or more than 10 kW is needed, take the EQUINOX2 T / T-RV of 4–100 kW. When backup power from a battery is needed, the hybrid HSX of 3–8 kW is suitable.
Request a price and lead time
EQUINOX2 S/SX — single-phase grid-tied solar inverters 2–10 kW. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What power ratings does the EQUINOX2 S inverter have?
A range of models of 2, 3, 4, 5, 6, 8 and 10 kW, all single-phase grid-tied.
Can the EQUINOX2 SX be installed outdoors?
Yes, the cast aluminum case with epoxy coating is designed for indoor and outdoor installation.
How to connect the EQUINOX2 S to monitoring?
The inverter has WiFi and LAN, and the data is sent to the EQUINOX portal and app.
Does the EQUINOX2 S work with batteries?
No, it is a grid-tied inverter. For storage a hybrid EQUINOX2 HSX of 3–8 kW or a three-phase HT is needed.
Does the EQUINOX2 S switch off when the grid is down?
Yes, a grid-tied inverter without a battery stops together with the grid. To power a house during outages a hybrid inverter with a battery is needed.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.