Multi HS19 Solar 15k — high-voltage three-phase hybrid inverter
Country: Netherlands · Model: Multi HS19 Solar 15k
The Multi HS19 Solar 15k three-phase hybrid inverter delivers 15 kW and takes PV on 4 MPPTs of 8 kW each across 100–600 V. It runs on a high-voltage battery and goes into commercial and residential energy storage systems (BESS).
- Power
- 15 kW, 3-phase
- PV input
- 4 MPPTs of 8 kW each, 100–600 V
- Battery
- high-voltage (HV)
- Design
- 19-inch enclosure for rack mounting with batteries
Technical specifications
| Power | 15 kW, 3-phase |
|---|---|
| PV input | 4 MPPTs of 8 kW each, 100–600 V |
| Battery | high-voltage (HV) |
| Design | 19-inch enclosure for rack mounting with batteries |
| Modes | off-grid, peak shaving, backup, grid feed-in |
| Customs codes (for reference) | |
| HS code | 8504.40 |
| UKTZED code (Ukraine) | 8504408800 (>7.5 kVA) |
| CN code (EU) | 85044084 |
Specifications are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
The 19-inch enclosure mounts in the same rack as the batteries, so the whole system fits in one cabinet in the plant room. The inverter combines the battery charger and the solar charge controllers, with no separate MPPTs or chargers in the circuit. Four trackers take panels from different roof faces or fields, and the combined PV input exceeds the 15 kW output, so part of the daytime yield goes straight into the battery. It supports off-grid operation, peak shaving, backup power and grid feed-in. Peak shaving matters to businesses billed for contracted capacity, as the inverter covers short load spikes from the battery. A high-voltage (HV) battery runs at lower currents than low-voltage banks, so the cables between rack and inverter are thinner and losses lower.
How to choose
This unit fits when a three-phase 15 kW system in one enclosure with an HV battery is wanted. A single-phase house is covered by the Multi RS Solar 48/6000 at 6 kVA with a 48 V bank and 2 trackers up to 450 V. If the site is already built on low-voltage 48 V batteries, a three-phase system is assembled from three MultiPlus-II units of 3–15 kVA each. When choosing the battery, confirm that the inverter supports its voltage and communication protocol.
Request a price and lead time
Multi HS19 Solar 15k — high-voltage three-phase hybrid inverter. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
How many MPPTs does the Multi HS19 Solar 15k have?
4 trackers of 8 kW each with a 100–600 V range.
What battery does the Multi HS19 need?
A high-voltage HV battery, installed with the inverter in one 19-inch rack.
Does the Multi HS19 Solar support peak shaving?
Yes, besides off-grid and backup modes the inverter shaves peaks and feeds energy to the grid.
Can a 48 V battery be used with the Multi HS19 Solar 15k?
No, the inverter is built for an HV battery. For 48 V banks the Multi RS Solar 48/6000 or MultiPlus-II fit.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.