DT flooded deep-cycle monoblocks 6/8/12 V
Country: China · Model: DT
DT flooded traction monoblocks rated 6, 8 and 12 V with flat plates, made for daily deep discharge. Their main use is in golf carts, lifts, small electric vehicles and AWP platforms.
- Technology
- flooded, flat plates, SiO₂-PVC separators
- Voltage
- 6, 8, 12 V
- Case
- PP, vibration-resistant
- Application
- golf carts, electric vehicles, AWP
Technical specifications
| Technology | flooded, flat plates, SiO₂-PVC separators |
|---|---|
| Voltage | 6, 8, 12 V |
| Case | PP, vibration-resistant |
| Application | golf carts, electric vehicles, AWP |
Specifications are taken from the manufacturer’s technical documentation. Updated .
Description
The design is the classic one for traction batteries with liquid electrolyte, with flat plates and SiO₂-PVC separators between them. The polypropylene PP case is reinforced against vibration, since the battery rides on the machine frame over uneven ground. The flooded design requires checking the electrolyte level and topping up with distilled water. Gas is released during charging, so the battery compartment must be ventilated. In return, these monoblocks tolerate a deep discharge over a shift and a full charge overnight. The units are connected in series, and their number is chosen to match the on-board voltage of the particular machine.
How to choose
First determine the voltage of the machine's battery compartment and how many units fit in it, which gives the rating of 6, 8 or 12 V. If nobody can look after the electrolyte, take sealed LPC AGM monoblocks at 6 or 12 V with a capacity of 3.5–150 Ah. Electric forklifts with a battery tray need PzS or PzB traction cells, not monoblocks. A 12.8 V lithium replacement is offered by the LFeLi series with a life of 5000 cycles at 50% DoD.
Request a price and lead time
DT flooded deep-cycle monoblocks 6/8/12 V. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What equipment are DT monoblocks intended for?
For golf carts, AWP lifting platforms, small electric vehicles and other wheeled equipment with a traction battery compartment.
Does water need to be added to DT batteries?
Yes, these are flooded monoblocks with liquid electrolyte. The level is checked periodically and distilled water is added after charging.
What separators are fitted in DT monoblocks?
SiO₂-PVC separators are fitted between the flat plates, that is, polyvinyl chloride with a silica filler.
What voltage do DT traction monoblocks have?
Units rated 6, 8 and 12 V are produced. They are connected in series to obtain the on-board voltage of the machine.
Does the DT case withstand vibration?
The case is made of polypropylene PP in a vibration-resistant version, designed for the shaking while the machine is moving.
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.