POWERBRICK CONNECT SOLID-STATE LIFEPO4 BATTERIES WITH CAN/RS485 AND HEATING
PowerBrick Connect 12V 212Ah solid-state LiFePO4 battery with CAN/RS485 and heater
Country: France · Model: PowerBrick Connect 12V-212Ah-SS-AB-CAN-H
A 12.8 V / 212 Ah solid-state LiFePO4 battery with 2,714 Wh, CAN Bus and RS485 links and cell heating. It delivers 200 A continuously and 250 A for 30 s, weighs 21.9 kg and reports to a 12 V system controller.
- Voltage
- 12.8 V
- Capacity
- 212 Ah
- Energy
- 2,714 Wh
- Cycle life
- >4500
- Protection
- IP65
- Weight
- 21.9 kg
- Dimensions
- 505 × 185 × 242
Technical specifications
| Electrical | |
|---|---|
| Nominal voltage / nominal capacity | 12.8 V / 212 Ah |
| Stored energy | 2,714 Wh |
| Volumetric energy density / specific energy | 121.2 Wh/L / 123.9 Wh/kg |
| Internal resistance | ≤ 10 mΩ |
| Cycle life | > 4,500 cycles |
| Self-discharge | < 3% per month |
| Energy efficiency | > 98% |
| Standard charge | |
| Charge voltage | 14.4 V ± 0.2 V |
| Charge mode | CC/CV (constant current / constant voltage) |
| Continuous charge current / maximum charge current | 180 A / 200 A |
| BMS charge cut-off voltage | 14.8 V ± 0.1 V |
| Standard discharge | |
| Instant peak discharge current | 800 A (300 ms) |
| Continuous discharge current | 200 A |
| Maximum discharge current (< 30 s) | 250 A |
| BMS discharge cut-off voltage | 10 V |
| Environmental | |
| Charge temperature range | 0 °C to +55 °C |
| Discharge temperature range | −20 °C to +60 °C |
| Storage conditions | 0 °C to +50 °C at 60 ± 25% relative humidity |
| IP rating | IP65 |
| Mechanical | |
| Cell type | Solid-state LiFePO4 cells |
| Casing material | ABS plastic |
| Dimensions | 505 × 185 × 242 mm |
| Weight | 21.9 kg |
| Terminals | M8 (power), IP67 M12 connector for CAN / RS485 |
| Customs codes (for reference) | |
| HS code | 8507.60 |
| UKTZED code (Ukraine) | 8507600000 |
| CN code (EU) | 85076000 |
Specifications, charts and drawings are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
Power terminals are M8, the data line runs to an M12 IP67 connector, and the IP65 ABS case measures 505 × 185 × 242 mm. Over the bus a controller or inverter reads aggregated data for the whole bank instead of polling each pack. Heating keeps the cells working in cold down to −20 °C, while charging is rated from 0 °C. An 800 A peak holds for 300 ms, internal resistance is 10 mΩ max, and the BMS ends discharge at 10 V. Precharge softens the inrush into load capacitors.
How to choose
Pick Connect over the Bluetooth version for a wired control link and unheated bays. For a 24 V bus there is the PowerBrick Connect 24V-120Ah-SS-AB-CAN-H at 3,072 Wh and 24.4 kg, for 48 V the PowerBrick Connect 48V-53Ah-SS-AB-CAN-H with the same 2,714 Wh at a quarter of the current.
Features
- 4,500+ cycle life
- CAN Bus, RS485 for 16-pack banks
- Solid-state LiFePO4, no thermal runaway
- Low-loss active balancing
- Recharges in under one hour
- BMS for life and safety
- Matched cells, laser-welded links
- Cell heating down to −20 °C
- Precharge for capacitive loads
- No cobalt, manganese, nickel or rare earths
- Calendar life over 10 years
- Runs at −20 to +60 °C
- No power sag in discharge
- Low Peukert losses, over 98% efficiency
- Self-discharge under 3% a month
- Discharge to 100%
- No memory effect
- About 50% lighter, 40% smaller than AGM
Applications
Certifications
Request a price and lead time
PowerBrick Connect 12V 212Ah solid-state LiFePO4 battery with CAN/RS485 and heater. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
How do I charge the PowerBrick Connect 12V-212Ah-SS-AB-CAN-H?
CC/CV to 14.4 V ± 0.2 V, 180 A continuous and 200 A maximum. The BMS cuts charging at 14.8 V ± 0.1 V.
What temperatures suit the PowerBrick Connect 12V-212Ah-SS-AB-CAN-H?
Charge 0 °C to +55 °C, discharge −20 °C to +60 °C. Cell heating covers cold down to −20 °C.
Can PowerBrick Connect 12V-212Ah-SS-AB-CAN-H packs form a bank?
Yes, up to 16 in parallel. Aggregated bank data goes out over CAN Bus and RS485.
What data connector does the PowerBrick Connect 12V-212Ah-SS-AB-CAN-H use?
An M12 IP67 connector for CAN and RS485, with separate M8 power terminals.
Other models in this series
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.