POWERBRICK CONNECT SOLID-STATE LIFEPO4 BATTERIES WITH CAN/RS485 AND HEATING
PowerBrick Connect 48V 53Ah solid-state LiFePO4 battery with CAN/RS485 and heater
Country: France · Model: PowerBrick Connect 48V-53Ah-SS-AB-CAN-H
A 51.2 V / 53 Ah solid-state LiFePO4 battery (2,714 Wh) for 48 V systems whose inverter reads the BMS over CAN Bus or RS485. It runs 100 A continuous, 150 A for 30 s, heats cells to −20 °C and weighs 21.3 kg.
- Voltage
- 51.2 V
- Capacity
- 53 Ah
- Energy
- 2,714 Wh
- Cycle life
- >4500
- Protection
- IP65
- Weight
- 21.3 kg
- Dimensions
- 505 × 185 × 242
Technical specifications
| Electrical | |
|---|---|
| Nominal voltage / nominal capacity | 51.2 V / 53 Ah |
| Stored energy | 2,714 Wh |
| Volumetric energy density / specific energy | 121.0 Wh/L / 127.4 Wh/kg |
| Internal resistance | ≤ 10 mΩ |
| Cycle life | > 4,500 cycles |
| Self-discharge | < 3% per month |
| Energy efficiency | > 98% |
| Standard charge | |
| Charge voltage | 57.6 V ± 0.8 V (optional float voltage: 53.44 V max) |
| Charge mode | CC/CV (constant current / constant voltage) |
| Continuous charge current / maximum charge current | 80 A / 100 A |
| BMS charge cut-off voltage | 59.2 V ± 0.4 V |
| Standard discharge | |
| Instant peak discharge current | 600 A (300 ms) |
| Continuous discharge current | 100 A |
| Maximum discharge current (< 30 s) | 150 A |
| BMS discharge cut-off voltage | 40 V |
| Environmental | |
| Charge temperature range | 0 °C to +55 °C |
| Discharge temperature range | −20 °C to +60 °C |
| Storage conditions | 0 °C to +50 °C at 60 ± 25% relative humidity |
| IP rating | IP65 |
| Mechanical | |
| Cell type | Solid-state LiFePO4 cells |
| Casing material | ABS plastic |
| Dimensions | 505 × 185 × 242 mm |
| Weight | 21.3 kg |
| Terminals | M8 (power), IP67 M12 connector for CAN / RS485 |
| Customs codes (for reference) | |
| HS code | 8507.60 |
| UKTZED code (Ukraine) | 8507600000 |
| CN code (EU) | 85076000 |
Specifications, charts and drawings are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
The IP65 ABS case is 505 × 185 × 242 mm, with M8 power terminals and an M12 IP67 data connector. A hybrid inverter with a BMS port sees the bank state over the bus and can run charging from that data. A 600 A peak holds for 300 ms, charging runs at 80 A continuous, and BMS cutoffs are 59.2 V on charge and 40 V on discharge. Precharge spares the contacts when a capacitive inverter input is connected. Specific energy is 127.4 Wh/kg, the highest of the Connect models.
How to choose
Choose it for unheated rooms or when the inverter must read data over a wire. For a 24 V bus there is the PowerBrick Connect 24V-120Ah-SS-AB-CAN-H at 3,072 Wh, for 12 V the PowerBrick Connect 12V-212Ah-SS-AB-CAN-H with the same 2,714 Wh at 21.9 kg.
Features
- 4,500+ cycle life
- CAN Bus, RS485 for 16-pack banks
- Solid-state LiFePO4, no thermal runaway
- Low-loss active balancing
- Recharges in under one hour
- BMS for life and safety
- Matched cells, laser-welded links
- Cell heating down to −20 °C
- Precharge for capacitive loads
- No cobalt, manganese, nickel or rare earths
- Calendar life over 10 years
- Runs at −20 to +60 °C
- No power sag in discharge
- Low Peukert losses, over 98% efficiency
- Self-discharge under 3% a month
- Discharge to 100%
- No memory effect
- About 50% lighter, 40% smaller than AGM
Applications
Certifications
Request a price and lead time
PowerBrick Connect 48V 53Ah solid-state LiFePO4 battery with CAN/RS485 and heater. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What charger suits the PowerBrick Connect 48V-53Ah-SS-AB-CAN-H?
A CC/CV charger at 57.6 V ± 0.8 V, 80 A continuous and 100 A maximum. Float 53.44 V max, BMS charge cutoff 59.2 V ± 0.4 V.
What are the temperature limits of the PowerBrick Connect 48V-53Ah-SS-AB-CAN-H?
Charge 0 °C to +55 °C, discharge −20 °C to +60 °C. Cell heating covers cold down to −20 °C.
How do I bank PowerBrick Connect 48V-53Ah-SS-AB-CAN-H packs?
Up to 16 in parallel, with bank data sent over CAN Bus and RS485.
How is the PowerBrick Connect 48V-53Ah-SS-AB-CAN-H wired to an inverter over CAN?
Data runs through the M12 IP67 connector with CAN Bus and RS485, power through the M8 terminals.
Other models in this series
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.