POWERBRICK CONNECT SOLID-STATE LIFEPO4 BATTERIES WITH CAN/RS485 AND HEATING
PowerBrick Connect 24V 120Ah solid-state LiFePO4 battery with CAN/RS485 and heater
Country: France · Model: PowerBrick Connect 24V-120Ah-SS-AB-CAN-H
A solid-state 25.6 V / 120 Ah LiFePO4 battery that stores 3,072 Wh and links to the control system over CAN Bus or RS485. It runs 150 A continuous, 200 A for 30 s, heats cells to −20 °C and weighs 24.4 kg.
- Voltage
- 25.6 V
- Capacity
- 120 Ah
- Energy
- 3,072 Wh
- Cycle life
- >4500
- Protection
- IP65
- Weight
- 24.4 kg
- Dimensions
- 505 × 185 × 242
Technical specifications
| Electrical | |
|---|---|
| Nominal voltage / nominal capacity | 25.6 V / 120 Ah |
| Stored energy | 3,072 Wh |
| Volumetric energy density / specific energy | 137.0 Wh/L / 125.9 Wh/kg |
| Internal resistance | ≤ 10 mΩ |
| Cycle life | > 4,500 cycles |
| Self-discharge | < 3% per month |
| Energy efficiency | > 98% |
| Standard charge | |
| Charge voltage | 28.8 V ± 0.4 V (optional float voltage: 26.72 V max) |
| Charge mode | CC/CV (constant current / constant voltage) |
| Continuous charge current / maximum charge current | 130 A / 150 A |
| BMS charge cut-off voltage | 29.6 V ± 0.1 V |
| Standard discharge | |
| Instant peak discharge current | 800 A (300 ms) |
| Continuous discharge current | 150 A |
| Maximum discharge current (< 30 s) | 200 A |
| BMS discharge cut-off voltage | 20 V |
| Environmental | |
| Charge temperature range | 0 °C to +55 °C |
| Discharge temperature range | −20 °C to +60 °C |
| Storage conditions | 0 °C to +50 °C at 60 ± 25% relative humidity |
| IP rating | IP65 |
| Mechanical | |
| Cell type | Solid-state LiFePO4 cells |
| Casing material | ABS plastic |
| Dimensions | 505 × 185 × 242 mm |
| Weight | 24.4 kg |
| Terminals | M8 (power), IP67 M12 connector for CAN / RS485 |
| Customs codes (for reference) | |
| HS code | 8507.60 |
| UKTZED code (Ukraine) | 8507600000 |
| CN code (EU) | 85076000 |
Specifications, charts and drawings are taken from the manufacturer’s technical documentation. Updated . Customs codes are for reference only; the final code is determined at customs declaration for the specific model.
Description
The IP65 ABS case is 505 × 185 × 242 mm with M8 power terminals and an M12 IP67 data connector. An 800 A peak lasts up to 300 ms, and precharge softens the inrush when an inverter is connected. It takes 130 A continuous and 150 A maximum charge current, and the BMS cuts charging at 29.6 V and discharge at 20 V. For carts and AGVs in cold warehouses, cell heating and state data on the vehicle controller matter more than Bluetooth. Specific energy is 125.9 Wh/kg.
How to choose
Against the PowerBrick Smart 24V-120Ah-SS-AB-BT of equal energy, this version trades Bluetooth for a wired bus and adds heating. For 12 V there is the PowerBrick Connect 12V-212Ah-SS-AB-CAN-H at 2,714 Wh, for 48 V the 21.3 kg PowerBrick Connect 48V-53Ah-SS-AB-CAN-H.
Features
- 4,500+ cycle life
- CAN Bus, RS485 for 16-pack banks
- Solid-state LiFePO4, no thermal runaway
- Low-loss active balancing
- Recharges in under one hour
- BMS for life and safety
- Matched cells, laser-welded links
- Cell heating down to −20 °C
- Precharge for capacitive loads
- No cobalt, manganese, nickel or rare earths
- Calendar life over 10 years
- Runs at −20 to +60 °C
- No power sag in discharge
- Low Peukert losses, over 98% efficiency
- Self-discharge under 3% a month
- Discharge to 100%
- No memory effect
- About 50% lighter, 40% smaller than AGM
Applications
Certifications
Request a price and lead time
PowerBrick Connect 24V 120Ah solid-state LiFePO4 battery with CAN/RS485 and heater. We reply within one business day.
Or email office@usk.ua or call +38 (044) 339-50-20.
FAQ
What voltage and current charge the PowerBrick Connect 24V-120Ah-SS-AB-CAN-H?
CC/CV to 28.8 V ± 0.4 V, 130 A continuous and 150 A maximum. Float 26.72 V max, BMS charge cutoff 29.6 V ± 0.1 V.
Can the PowerBrick Connect 24V-120Ah-SS-AB-CAN-H be charged in frost?
Charging is rated 0 °C to +55 °C, discharge −20 °C to +60 °C. Built-in cell heating covers cold down to −20 °C.
How many PowerBrick Connect 24V-120Ah-SS-AB-CAN-H packs can run in parallel?
Up to 16. Aggregated bank data is sent over CAN Bus and RS485.
How does the PowerBrick Connect 24V-120Ah-SS-AB-CAN-H differ from the Bluetooth version?
CAN Bus and RS485 on an M12 IP67 connector replace Bluetooth, and cell heating is added. Energy stays at 3,072 Wh.
Other models in this series
Similar products
REQUEST
Need a price, lead time or replacement?
Send us a request and we will confirm the configuration, lead time and delivery terms. We reply by email.